Hi comunityI'm trying to test the hello application on the ODROID-X2(Exynos4412) board. I'm using the Fiasco.OC+L4re snapshot(l4re-snapshot-2014092821).
I have configured and compiled Fiasco.OC with support to Samsung Exynos4412:
export SYSTEM_TARGET=arm-linux-gnueabihf- make BUILDDIR=build-foc make menuconfig make -j16 After that, I have compiled the entire L4re for armv7a (SamsungExynos4) make B=build-l4re make O=build-l4re ARCH=arm SYSTEM_TARGET=arm-linux-gnueabihf- menuconfig make O=build-l4re ARCH=arm SYSTEM_TARGET=arm-linux-gnueabihf- -j16To generate the raw image have modified the conf/Makeconf.boot to set the Fiasco.OC build path and executed:
make O=build-l4re ARCH=arm SYSTEM_TARGET=arm-linux-gnueabihf- rawimage E=helloI have copied the generated image into the SD card and tried to boot from u-boot:
fatload mmc 0:1 0x41000000 hello.raw bootm 0x41000000 The system starts but stops execution. This is the serial output: Partition1: Start Address(0xc00), Size(0x40400) reading hello.raw 942080 bytes read Boot with zImage Starting kernel ... Hello from Startup::stage2 Per_cpu_data_alloc: (orig: 0xf0063a50-0xf00644d0) Number of IRQs available at this GIC: 160 FPU0: Arch: VFPv3(3), Part: VFPv3(30), r: 4, v: 9, i: 41, t: hard, p: dbl/sngl KERNEL: Warning: No page-fault handler for 0xee202214, error 0x94000848, pc f0039420Somebody have tested Fiasco.OC+L4re on ODROID-X2 or another Exynos 4412 platform?
Best regards -- Lic. Reinier Millo Sánchez Centro de Estudios de Informática Universidad Central "Marta Abreu" de Las Villas Carretera a Camajuaní Km 5 1/2 Santa Clara, Villa Clara, Cuba CP 54830 "antes de discutir ... respira; antes de hablar ... escucha; antes de escribir ... piensa; antes de herir ... siente; antes de rendirte ... intenta; antes de morir ... vive"
<<attachment: rmillo.vcf>>
_______________________________________________ l4-hackers mailing list l4-hackers@os.inf.tu-dresden.de http://os.inf.tu-dresden.de/mailman/listinfo/l4-hackers