While Robin makes some good points here, and perhaps the $5/wood, $10/bone formula is a good one to go with, ultimately. The issue is not what you paid for a bobbin in the 1990's or even what you would pay for a bobbin now, but what you could sell the bobbin for, now. Typically retail has 100% mark up. So, the minute you drive that bobbin out of the "showroom" so to speak, you would be lucky to sell it for half what you paid for it. Also, the bobbins are "used". They may not be polished, they may have nicks in them. They may have thread on them. They may be dusty. I bought hundreds of wood bobbins from an estate for a dollar a piece. That was a year or two ago. Now we are in a market where houses and stock are worth 30% less than a year ago in many cases. If a couple were to split their assets based on the historical value of their home and stocks, it would be unreasonable. What is the market for used lace equipment now? I went into a Metropolitan Museum store at my local mall, which is being closed due to severe cut backs at the museum, which will be resulting in layoffs. Everything in the store was at half price, including a lovely necklace such as I had bought to wear to my daughter's graduation two years ago. Even at half price, and with my museum discount, I didn't see anything I wanted to buy, given the economic climate. Devon
In a message dated 5/22/2009 12:31:44 A.M. Eastern Daylight Time, [email protected] writes: A number of people have posted suggestions on who the makers were, and you have responded by whether the name sounded familiar. Another way to do this is to look at the websites and old catalogues and see if the *style* is familiar. Many bobbin makers have distinctive styles, especially the shape of the head and the tail. For example, Acorn bobbins generally have an acorn-shape tail end. Springett's bone bobbins have a head composed of a very round ball with a very flat disk (his wood bobbins don't have the distinctive head, but they're shorter than most makers'). Fielding's bobbins have a long tapered piece, like a cone, where Springett's is a thin disk. Stuart Johnson has a tiny head with deep groove for the thread. My suggestion is to start by looking at samples of bobbins, not just to find your bobbins but to see if you have some of the same style. Then you could write or email the makers to see if they have info on what their bobbins sold for in the '90s. Here's my opinion/suggestion for the relative pricing. In general, bone were much more expensive than wood (I'd say bone, in the '90s, cost about what fancy wood Midlands sell for now, but I don't claim to be expert). Painting pictures (flowers, people, scenes) cost a lot more than paint that colored areas of the bobbin (barber pole stripes, graduated color). However, some detailed "painted" designs are actually decals stuck on and lacquered. Mother-of-pearl inlay is quite expensive, pewter inlay significantly less so. Beads and/or wire wrapping are probably somewhere around the price of pewter decorations (a little more, a little less, but same ballpark). Fancy turning of wood would be a bit less than the extra decorations mentioned above, but certainly worth more than simple/plain bobbins. I agree with whoever pointed out that most wood bobbins, no matter how fancy the decoration, were well below $10 each in the '90s, probably more like $5 each (less, for the simpler turnings). I think bone were mostly around $10, maybe as much as $15 for the really fancy ones. Rather than trying to identify and price each bobbin, if you use these values ($5 for wood, $10 for bone) on the assumption that some of yours were more and some were less, that should give you a reasonable assessment of your collection's worth. Robin P. Los Angeles, California, USA [email protected] - To unsubscribe send email to [email protected] containing the line: unsubscribe lace [email protected]. For help, write to [email protected] **************Kick start your favorite gradâs career with mobile email for under $50. (http://pr.atwola.com/promoclk/100122638x1221971194x1201441917/aol?redir==htt p://www.getpeek.com/aol) - To unsubscribe send email to [email protected] containing the line: unsubscribe lace [email protected]. For help, write to [email protected]
