I did a quick translation, hope it helps
Lace necklace
Materials needed:
- round shoe lace 45 to 65cm
- one large bead with large hole
- worker pair: DMC Fil a Dentelle 80, 6 times the length of the shoe lace
- 10-20 passive pairs, depending on the thickness of the shoe lace. Wind
half with thick thread such as Madeira Glamour, Decor (double threads) or
Goldrush. The others with thinner thread e.g. Venne Creafil, Madeire
Metallic, DMC Fil a Dentelle, Supertwist.
Working:
Hang pairs on one pin. Pin shoe lace down and leave pin in as long as
possible.
Only put pins in at the left side.
Use a strip of graph paper as a pattern guide.
WS from left to right, and keep the lace on the top.
Put worker pair to the left over the work and the shoe lace. Put up a pin
between pairs 1and 2, and work back to the right.
Push pins down asap, and pull the outer right pairs every so often to the
left.
Repeat until you have the desired length you’d like.
Put the bead onto the lace cord.
Tie the shoe lace ends, or put a clasp in between.
-
To unsubscribe send email to majord...@arachne.com containing the line:
unsubscribe lace y...@address.here. For help, write to
arachne.modera...@gmail.com. Photo site:
http://community.webshots.com/user/arachne2003/albums/most-recent
