Hello, Hsaltiel, Hern?n Saltiel ??: > Hello! > I'm configuring a new Lenoo S10e laptop, which has a BCM4312 Broadcom WiFi > interface. > I saw all over the sites that there are some workarounds to make this card > work, as happens with (no workaround in this case) the ndis programs. > Well, I've followed all the step with version 1.2.1, 1.2.2, and 1.2.3-prelim. > The only that does not panic my system is the 1.2.3, but the behaviour of the > network interface is a bit strange. > If I use WPA personal, it does not work, even asking for the key, and > entering the correct one. > If I disable WPA, and leave it without any protocol, it connects. After this, > if I reconfigure WPA, and try to make the system ask for a key, the network > applets of Gnome become very unstable. > wpa feature in ndis is not available by now, you can only connect to AP under none/wep mode. In current plan, NDIS/wpa release was scheduled to November,09. > When the system boots (take a bit more to boot), starts giving some messages > like "WARNING: ntoskrnl lost API", It means you need to wrap another Windows(r) driver. Please try the driver in ndis project page. If the device is "14E4,4312", below driver should work(as mentioned in ndis page): http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=457948&prodNameId=457949&swEnvOID=1059&swLang=8&mode=2&taskId=135&swItem=ob-36728-1
Thanks, Michael
