Hello, Michael! On Tue, 2009-06-09 at 10:12 +0800, Michael Li wrote: > Hello, Hsaltiel, > > Hern?n Saltiel ??: Yes, that's me!!! Sometimes HSaltiel, sometines HeCSa (because of Hern?n Claudio Saltiel)
> > Hello! > > I'm configuring a new Lenoo S10e laptop, which has a BCM4312 Broadcom WiFi > > interface. > > I saw all over the sites that there are some workarounds to make this card > > work, as happens with (no workaround in this case) the ndis programs. > > Well, I've followed all the step with version 1.2.1, 1.2.2, and > > 1.2.3-prelim. > > The only that does not panic my system is the 1.2.3, but the behaviour of > > the network interface is a bit strange. > > If I use WPA personal, it does not work, even asking for the key, and > > entering the correct one. > > If I disable WPA, and leave it without any protocol, it connects. After > > this, if I reconfigure WPA, and try to make the system ask for a key, the > > network applets of Gnome become very unstable. > > > wpa feature in ndis is not available by now, you can only connect to AP > under none/wep mode. In current plan, NDIS/wpa release was scheduled to > November,09. > > When the system boots (take a bit more to boot), starts giving some > > messages like "WARNING: ntoskrnl lost API", > It means you need to wrap another Windows(r) driver. Please try the > driver in ndis project page. If the device is "14E4,4312", below driver The device is "14e4,4315", but I'll try with the HP drivers...I didn't tried this combination, thanks! > should work(as mentioned in ndis page): > http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=457948&prodNameId=457949&swEnvOID=1059&swLang=8&mode=2&taskId=135&swItem=ob-36728-1 Thanks again, Michael!!! > > Thanks, > Michael Best regards, HeCSa. -- This message posted from opensolaris.org
