Luc, Here is the data from the lspci binary you sent me: # ./lspci pcilib: Bus 00 seen twice (firmware bug). Ignored. 00:00.0 Host bridge: VIA Technologies, Inc. VT8363/8365 [KT133/KM133] (rev 80) 00:01.0 PCI bridge: VIA Technologies, Inc. VT8363/8365 [KT133/KM133 AGP] 00:0a.0 CardBus bridge: O2 Micro, Inc. OZ601/6912/711E0 CardBus/SmartCardBus Controller 00:11.0 ISA bridge: VIA Technologies, Inc. VT8231 [PCI-to-ISA Bridge] (rev 10) 00:11.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06) 00:11.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 1e) 00:11.4 Bridge: VIA Technologies, Inc. VT8235 ACPI (rev 10) 00:11.5 Multimedia audio controller: VIA Technologies, Inc. VT82C686 AC97 Audio Controller (rev 40) 00:11.6 Communication controller: VIA Technologies, Inc. AC'97 Modem Controller (rev 20) 00:12.0 Ethernet controller: VIA Technologies, Inc. VT6102 [Rhine-II] (rev 51) 01:00.0 VGA compatible controller: S3 Inc. VT8636A [ProSavage KN133] AGP4X VGA Controller (TwisterK) (rev 01)
This looks the same if the card is in or not. # grep ath /etc/driver_aliases ath "pci168c,12" ath "pci168c,13" ath "pci168c,1014" ath "pci168c,1a" ath "pci168c,1b" Vincent Wang, I did not see any messages before inserting the card, only the message in my first post. I am currently having some issues with the opensolaris install on the laptop as it went down hard on me a few minutes ago and is having issues booting now. I am going to reinstall, and try to gather the data you requested (I had set the debug level to 9, per your request I am going to try to set it to 1 after the reinstall to see if there is any more data to gather.) I will have limited net access over the weekend, but I will check when I can. Thanks for any help you can provide. Jamie
