Does the driver work without wep? Does your three APs have the same wepkey and wepkeyindex?
My Cisco 340 and 350 and minipci350 all work and all the 4 wekkeys work if they are the same to that configurated in the AP. I will try again with the driver and my cards to see what happens. -Brian Lloyd Staley Jr ???: > > Hi, > > I am having trouble getting a Cisco 350 pcmia card to connect using > WEP. The card shows up a boot time, from /var/adm/messages: > > > Jun 6 19:56:23 electra pcan: [ID 772099 kern.notice] NOTICE: Cisco > 802.11 pccard > Jun 6 19:56:23 electra pcic: [ID 152030 kern.notice] dip is:0xdab016c8 > Jun 6 19:56:23 electra pcic: [ID 759616 kern.notice] parent dip is: > 0xdab01b48 > Jun 6 19:56:24 electra pcan: [ID 210905 kern.notice] NOTICE: the > version of the > firmware in the wifi card 'Cisco Systems 350 Series pccard' is 4.25.30 > Jun 6 19:56:24 electra gld: [ID 944156 kern.info] pcan0: CISCO Aironet > 802.11b > Driver: type "ether" mac address 00:0d:bc:17:76:d7 > > I can plumb the card and the radio turns on and lights start blinking. > > After configuring a profile: > > # wificonfig showprofile home-wireless > [home-wireless] > essid=myssid > encryption=wep > bsstype=ap > authmode=opensystem > wepkey1=***** > > When I try to connect: > > # wificonfig -i pcan0 connect home-wireless > > wificonfig: failed to connect to profile 'home-wireless' > > Using the scan function shows the access points (there are three of > them with the same essid): > > # wificonfig -i pcan0 scan > essid bssid type encryption signallevel > myssid 00:12:17:aa:37:16 access point wep 4 > myssid 00:12:17:aa:3c:90 access point wep 5 > 00:12:17:74:a5:df access point wep 1 > > And get the parameters: > > # wificonfig -i pcan0 getparam > bssid: 00:12:17:74:a5:df > essid: myssid > bsstype: bss(ap, infrastructure) > channel: 6 > rates: 1,2,5.5,11 > powermode: off > authmode: opensystem > encryption: wep > wepkeyindex: 1 > signal: 3 > > This is all on an IBM A21p with Nevada B40. An IBM T41 with the > internal Intel wireless card works fine in the same environment using > the ipw device. Also I have tried multiple cards, all with the same > firmware version and the same results. > > Any ideas? > > Thanks, > > Lloyd Staley > > _______________________________________________ > laptop-discuss mailing list > laptop-discuss at opensolaris.org
