I see this in my messages since I put in the Wistron CM9 card that IRQ21 is shared between them. Is there a way to change this to keep them on different IRQs? I didn't see anything apparent in the BIOS. I've noticed my wireless isn't that fast nor seems very stable.
Thanks! -William Jun 25 08:11:39 Asapurna npe: [ID 236367 kern.info] PCI Express-device: pci1025,7e at 14,5, audioixp0 Jun 25 08:11:39 Asapurna genunix: [ID 936769 kern.info] audioixp0 is /pci at 0,0/pci1025,7e at 14,5 Jun 25 08:11:39 Asapurna pseudo: [ID 129642 kern.info] pseudo-device: pool0 Jun 25 08:11:39 Asapurna genunix: [ID 936769 kern.info] pool0 is /pseudo/pool at 0 Jun 25 08:13:15 Asapurna unix: [ID 954099 kern.info] NOTICE: IRQ21 is being shared by drivers with different interrupt levels. Jun 25 08:13:15 Asapurna This may result in reduced system performance. Jun 25 08:13:15 Asapurna genunix: [ID 678236 kern.info] Ethernet address = 0:b:6b:4e:70:10 Jun 25 08:13:15 Asapurna gld: [ID 944156 kern.info] ath0: Atheros driver: type "ether" mac address 00:0b:6b:4e:70:10 Jun 25 08:13:15 Asapurna pci_pci: [ID 370704 kern.info] PCI-device: pci185f,1012 at 2, ath0 Jun 25 08:13:15 Asapurna genunix: [ID 936769 kern.info] ath0 is /pci at 0,0/pci1002,4371 at 14,4/pci185f,1012 at 2 This message posted from opensolaris.org
