Hi Uwe, The zyd driver v0.1 driver does not support WEP and WPA.
There is a community version maintained by Ben Taylor, which does support both WEP and WPA. You can try it: http://svn9.cvsdude.com/kdesolaris/zyd There was some effort to integrated the zyd driver into ON. And now it's done. The driver was based on the community version 0.1.3.1 (of course with WEP and WPA support), and was integrated into snv_107. You can use it soon and please let me know if you still have problems. Thanks, Tim On Sat, 2009-01-10 at 19:44 -0800, Uwe Dippel wrote: > Almost one year ago I started to get WiFi working on my boxen. > > Here is the sad wrap-up: > - zyd was said to be supported, I read the respective page and bought a > 3COM10075 > - compilation as described on that page failed > - needed to download close to 800MB of onnv-gate > - compilation went through, but WPA was not supported > - a lost cause, since WEP is of no use > > - rum was the latest addition, supports WPA (so says the rum page) > - so I bought one, read the rum-page (very easy to setup, so it looks) > - compiled, and it went through > - alas, some arcane sequence needed to be added to driver_alisases, I did > that > - alas, it still didn't work. it doesn't, by default, with nwam, so I had to > disable nwam. > - it still would not work, and I was told that WPA would be supported soon > - snv_105 would support the WAP access points, so I upgraded > - it would not work, but crash the system > > [By now both USB-dongles connect on OpenBSD, using WPA, perfectly well, out > of the box. There essentially one person, a volunteer, has been doing the > work] > > A sad state of affairs, as far as my 2 sen carry me.
