On Sun, Jan 14, 2007 at 06:49:10AM +0300, Ja'far Railton wrote:
> Hello
>
> This is a new installation on an Acer TravelMate 4050 with 256 MB RAM.
>
> OS is Opensolaris snv_54 installed from 6 CD's.
>
> Boot hangs after 'Configuring devices'. Adding -rv to the Grub boot line
> shows that the hang/reboot occurs after a line that says something like
> 'sd0 is at pci [...]'.
OK, I have managed to squeeze out a little more info by booting with
the -arkv switch (copied by hand):
...
uhci2 is /pci at 0,0/pci1025,71 at 1d,2
cpu0: x86 (GenuineIntel family 6 model 13 step 6 clock 1600 MHz)
cpu0: Intel(r) Pentium(r) M processor 1.60 GHz
PCI-device: pci8086,2448 at 1e, pci_pci0
pci_pci0 is /pci at 0,0/pci8086,2448 at 1e
PCI-device: pci1025,71 at 4, pcic0
pcic0 is /pci at 0,0/pci8086,2448 at 1e/pci1025,71 at 4
/pci at 0,0/pci8086,2448 at 1e/pci1025,71 at 4/pcs at 0 (pcs0) online
PCI-device: pci1025,71 at 0, hci13940
hci13940 is /pci at 0,0/pci8086,2448 at 1e/pci1025,71 at 0
Hostname: acer
UltraDMA mode 5 selected
dump on /dev/dsk/c0d0s1 size 596 MB
Configuring devices.
ATAPI device at targ 0, lun 0 lastlun 0xfffe
model HL-DT-STCD-RW/DVD DRIVE GCC-4243N
ATA/ATAPI-5 supported, majver 0x3c minver 0x13
PCI-device: ide at 1, ata1
ata1 is /pci at 0,0/pci-ide at 1f,1/ide at 1
MultiwordDMA mode 2 selected
MultiwordDMA mode 2 selected
MultiwordDMA mode 2 selected
sd0 at ata1: target 0 lun 0
sd0 is /pci at 0,0/pci-ide at 1f,1/ide at 1/sd at 0,0
_
And that's where is hangs. HTH.
-jr
