Added powernow-2005-10-10 and acpidrv-2005-08-02, as well as the acerkb hacks. Mostly works fine, although I'd like to add the dedicated $ and euro keys if I knew how. One oddity so far: batstat says
System is currently on AC power System temperature = 64.0C Battery 0 not present even though the battery is very obviously installed and working (either charged or charging). The line about AC power disappears if I disconnect the AC, but the "Battery 0 not present" line remains. One other thing that started before I put the powernow driver on: after awhile the display would blink somewhat randomly between bright and the reduced brightness usually used when on battery, even though plugged in to steady AC. Very annoying. Even a reboot or power cycle didn't stop it; rebooting into Windows, and changing some power settings (and back to their original value) and/or disconnecting the AC stopped it finally. ISTR a setting somewhere, either in PROM setup or Windows, as to whether it should use lower brightness when on battery; maybe if it does it again I'll try to track that down and turn it off for now. This message posted from opensolaris.org
