Hi all,
I am setting up a Diffserv router. Part of the script that I use it as
follows:
---------------------------------------------------
sudo /usr/bin/tc qdisc add dev r1p4 handle 1:0 root dsmark indices 64
set_tc_index
sudo /usr/bin/tc filter add dev r1p4 parent 1:0 protocol ip prio 1
tcindex mask 0xfc shift 2 pass_on
sudo /usr/bin/tc qdisc add dev r1p4 parent 1:0 handle 2:0 cbq bandwidth
10Mbit allot 1514 cell 8 avpkt 1456 mpu 64
sudo /usr/bin/tc filter add dev r1p4 parent 2:0 protocol ip prio 1
tcindex mask 0xf0 shift 4 pass_on
sudo /usr/bin/tc class add dev r1p4 parent 2:0 classid 2:1 cbq bandwidth
10Mbit rate 6Mbit avpkt 1456 prio 5 bounded allot 1514 weight 600Kbit
maxburst 21
sudo /usr/bin/tc filter add dev r1p4 parent 2:0 protocol ip prio 1
handle 1 tcindex classid 2:1
sudo /usr/bin/tc qdisc add dev r1p4 parent 2:1 gred setup DPs 3 default 2
grio
---------------------------------------------------
This last line where I setup the gred qdisc shows a message in the logs as
"NO GRED Queues setup! ". Can anybody comment on what this could mean? I
am using 2.2.18 with a Diffserv patch.
TIA,
Amit
PS.The remainin lines of the script include creating 3 gred qdiscs,
setting their limits and creating another CBQ class (2:2) for un(ds)marked
traffic.
--
I'm an angel!!! Honest!
The horns are just there to hold the halo up straight.
^-^-^-^-^-^-^-^-^-^-^-^-^-^-^-^-^-^-^-^-^-^-^-^-^-^-^
Amit Kucheria
EECS Grad. Research Assistant
University of Kansas @ Lawrence
(R): +1-785-830-8521 ||| (C): +1-785-760-2871
____________________________________________________
_______________________________________________
LARTC mailing list / [EMAIL PROTECTED]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
