On Mon, 10 Apr 2006 21:41:39 -0400 (EDT)
"George P Nychis" <[EMAIL PROTECTED]> wrote:
> Hi,
>
> I am trying to install a proprietary qdisc made for research, it is not
> publically released yet, however its been used several times so i know it
> works.
>
> The files included are:
> q_xcp.c:
> static int xcp_parse_opt()
> static int xcp_print_opt()
> static int xcp_print_xstats()
> struct qdisc_util xcp_util = { "NULL", "xcp" ..... };
>
> sch_xcp.c:
> static int xcp_enqueue()
> static int xcp_requeue()
> static struct sk_buff * xcp_dequeue()
> ....
> ....
> struct Qdisc_ops xcp_qdisc_ops ={ NULL,NULL,"xcp",.... };
>
> printk(KERN_INFO "XCP qdisc module loaded.\n");
> return register_qdisc(&xcp_qdisc_ops);
>
>
> So, i make everything successfully, it creates q_xcp.so and copies it to
> /usr/lib and sch_xcp.o which it copies to /lib/modules/... so then I "insmod
> sch_xcp" and i see in dmesg:
> "XCP qdisc module loaded."
>
> I then try:
> "tc qdisc add dev eth0 root xcp capacity 10Mbit limit 500" and get:
> "Unknown qdisc "xcp", hence option "capacity" is unparsable"
>
> So then I read the INSTALL further to find some sort of solution and it
> mentions:
> This again assumes "tc" version is 2.4.7. If your "tc" is a different
> version, download the iproute2 source code, and edit Makefile to
> point "TC_INCLUDE" to "-I..../iproute2/include -I..../iproute2/tc"
>
> So, i did that, and i recompiled the q_xcp.so:
> lanthanum-ini src-1.0.1 # make q_xcp.so
> cc -O2 -fPIC
> -I/var/tmp/portage/iproute2-2.6.11.20050310-r1/work/iproute2-2.6.11/include/
> -I/var/tmp/portage/iproute2-2.6.11.20050310-r1/work/iproute2-2.6.11/tc_include
> -o q_xcp.o -c q_xcp.c
> ld -shared -o q_xcp.so q_xcp.o
> rm -f q_xcp.o
>
> But i still get the same error.... so then my very final last effort was to
> move q_xcp.c to my iproute2 source code tc/ directory and added this to the
> makefile:
> TCMODULES += q_xcp.o
>
> Then I compiled tc, and i check tc to see if the xcp qdisc functions were
> loaded:
> lanthanum-ini tc # nm tc | grep xcp
> 080531ec t xcp_parse_opt
> 080533e0 t xcp_print_opt
> 08053426 t xcp_print_xstats
> 08070cc0 D xcp_util
>
> And finally:
> lanthanum-ini tc # ./tc qdisc add dev ath0 root xcp capacity 54Mbit limit 500
> Unknown qdisc "xcp", hence option "capacity" is unparsable
>
>
> I have no clue :( I figured that putting the .so into /usr/lib would have
> been enough. Sorry for the long e-mail, I hope someone can help, and thank
> you for your time even if you don't know the solution but read this :)
>
> - George
>
The .so needs to go in /usr/lib/tc (assuming you are running relatively recent
version
of iproute2 tools).
Read source to tc.c where it calls dlopen.
_______________________________________________
LARTC mailing list
LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc
