First I configured vsw0 with the mac address of bge0 and also for vnet0 I let the hypervisor assign it. Still the same issue....
Vijay Octave Orgeron wrote: > Hi, > > Make sure that you configure your VSW with the MAC address of the bge0 > interface. Also, did you force the allocation of the MAC for your guest > domain's vnet interface? I would let the hypervisor auto-assign it. > > *-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-* > Octave J. Orgeron > Solaris Systems Engineer > http://www.opensolaris.org/os/community/sysadmin/ > http://unixconsole.blogspot.com > unixconsole at yahoo.com > *-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-* > > ----- Original Message ---- > From: Vijay Upreti <Vijay.Upreti at Sun.COM> > To: ldoms-discuss at opensolaris.org > Sent: Thursday, March 27, 2008 10:23:33 PM > Subject: [ldoms-discuss] Issues with jumpstarting guest Ldom > > Hi, > > During Jumpstart process not able to get IP address from Jumpstart server. I > have been trying hard to get but clueless. Can you please advice. Following > are the details I am sending... > > ---------------------------------------------------------- > 1. > bash-3.00# telnet localhost 5000 > Trying 127.0.0.1... > Connected to localhost. > Escape character is '^]'. > > Connecting to console "ldg-sunt1" in group "ldg-sunt1" > .... > Press ~? for control options .. > > ~ ? > {0} ok > {0} ok boot vnet1 - install > > > Sun Fire(TM) T1000, No Keyboard > Copyright 2008 Sun Microsystems, Inc. All rights reserved. > OpenBoot 4.27.11, 1024 MB memory available, Serial #66692527. > Ethernet address 0:12:a5:f9:a5:af, Host ID: 83f9a5af. > > > > Boot device: /virtual-devices at 100/channel-devices at 200/network at 0e and > args: - install > Requesting Internet Address for 0:13:4f:fa:20:e2 > Requesting Internet Address for 0:13:4f:fa:20:e2 > Requesting Internet Address for 0:13:4f:fa:20:e2 > > ---------------------------------------------------------------- > 2. At Jumpstart server I get following rarp diagnosis messages > > bash-3.00# /usr/sbin/in.rarpd -da > /usr/sbin/in.rarpd:[1] device nge0 lladdress 0:e0:83:5a:41:c6 > /usr/sbin/in.rarpd:[1] device nge0 address 192.167.10.20 > /usr/sbin/in.rarpd:[1] device nge0 subnet mask 255.255.255.0 > /usr/sbin/in.rarpd:[3] starting rarp service on device nge0 address > 0:e0:81:5a:40:c6 > /usr/sbin/in.rarpd:[3] RARP_REQUEST for 0:13:4f:fa:20:e2 > /usr/sbin/in.rarpd:[3] trying physical netnum 192.167.10.0 mask ffffff00 > /usr/sbin/in.rarpd:[3] good lookup, maps to 192.167.10.177 > /usr/sbin/in.rarpd:[3] immediate reply sent > > -------------------------------------------------------------------- > 3. On control domain snoop results is as below ( mean not able to get the IP > address ) > > OLD-BROADCAST -> (broadcast) RARP C Who is 0:13:4f:fa:20:e2 ? > > -------------------------------------------------------------------- > 4. > LDOM Config details > > bash-3.00# ldm ls -l > NAME STATE FLAGS CONS VCPU MEMORY UTIL UPTIME > primary active -t-cv SP 4 2G 0.1% 1d 1h 38m > > SOFTSTATE > Openboot initializing > > VCPU > VID PID UTIL STRAND > 0 0 0.3% 100% > 1 1 0.1% 100% > 2 2 0.0% 100% > 3 3 0.0% 100% > > MAU > CPUSET > (0, 1, 2, 3) > > MEMORY > RA PA SIZE > 0x8000000 0x8000000 2G > > IO > DEVICE PSEUDONYM OPTIONS > pci at 780 bus_a > pci at 7c0 bus_b > > VDS > NAME VOLUME OPTIONS DEVICE > primary-vds0 vol1 /LDOM1 > > VCC > NAME PORT-RANGE > primary-vcc0 5000-5100 > > VSW > NAME MAC NET-DEV DEVICE MODE > primary-vsw0 00:14:2f:20:e3:60 bge0 switch at 0 prog,promisc > > VCONS > NAME SERVICE PORT > SP > > ------------------------------------------------------------------------------ > NAME STATE FLAGS CONS VCPU MEMORY UTIL UPTIME > ldg-sunt1 active -t--- 5000 4 1G 0.0% 40m > > SOFTSTATE > Openboot initializing > > VCPU > VID PID UTIL STRAND > 0 4 100% 100% > 1 5 0.0% 100% > 2 6 0.0% 100% > 3 7 0.0% 100% > > MEMORY > RA PA SIZE > 0x8000000 0x88000000 1G > > VARIABLES > auto-boot?=false > boot-device=vdisk > local-mac-address?=true > > NETWORK > NAME SERVICE DEVICE MAC > vnet1 primary-vsw0 at primary network at 0 > 0:13:4f:fa:20:e2 > > DISK > NAME VOLUME TOUT DEVICE SERVER > vdisk1 vol1 at primary-vds0 disk at 0 primary > > VCONS > NAME SERVICE PORT > ldg-sunt1 primary-vcc0 at primary 5000 > > -------------------------------------------------------------------- > > Please advice, this has been a real headache for a week. > > Vijay > > _______________________________________________ > ldoms-discuss mailing list > ldoms-discuss at opensolaris.org > http://mail.opensolaris.org/mailman/listinfo/ldoms-discuss > > > > > > > ____________________________________________________________________________________ > Looking for last minute shopping deals? > Find them fast with Yahoo! Search. > http://tools.search.yahoo.com/newsearch/category.php?category=shopping >
