This is a strange problem. My control domain has e1000g2 configured with IP address 10.60.181.11. On the control domain I created a virtual switch interface associated with e1000g2 and it is configured with IP address 10.60.181.230. I can access the control domain via both interfaces.
So then I created a guest domain and added vnet1 to the guest with vnet1 associated with the vsw previously created. Next I jumpstarted the guest using this command... "boot vnet1 - install" This worked well and now I can access the guest from another host via the IP I assigned which is 10.60.181.231. The problem is that from the control domain I seem to have no IP connectivity to the guest even though I know the guest is working normally on the network. All 2 IPs are in the same subnet so no routing should be required. >From the control domain I can access the guest only via the vxx on port 5000. Is there any additional configuration needed to make IP between control and guest work via the vsw? -- This message was posted from opensolaris.org
