IIRC you could already do VLAN tagging with LDOMs 1.1, have a look at the explanation of the "pvid" and "vid" options. Without deeper research I'd guess
ldm add-vsw pvid=531 net-dev=e1000g1 my-vlan-tagged-vswitch primary should do what you want (i.e. your LDOMs do not know that their packets are tagged with id 531 once they leave the physical system) HTH Martin On 08/01/09 14:28, Steve Goldthorpe wrote: > There is a way to do this with the e1000g0 (not the e1000g531001) > interface, but it's a bit fiddly and not supported. > > I'd upgrade to Solaris 10u7 & LDoms 1.2. With this config the > vswitches are vlan aware and will make your live much much easier. > > -Steve Goldthorpe > >> I 've a T5220 running solaris 10u6 with Ldoms 1.1. following is o/p >> of my dladm >> >> [CODE] e1000g0 type: non-vlan mtu: 1500 device: e1000g0 1 >> type: non-vlan mtu: 1500 device: e1000g1 e1000g531001 >> type: vlan 531 mtu: 1500 device: e1000g1 2 type: non-vlan >> mtu: 1500 device: e1000g2 e1000g3 type: non-vlan >> mtu: 1500 device: e1000g3 DE] >> >> I would like to use the interface e1000g531001 for my Ldoms as >> net-dev for vswitch is it possible to do that if yes with wat >> pvid/vid i have to add the vswitch -- Martin M?ller martin.mueller at sun.com Ambassador Datacenter Tel.: +49 2102 45 11740 Sun Microsystems GmbH Fax: +49 2102 499516 D-40880 Ratingen Mobil: +49 172 861 8483 Sitz der Gesellschaft: Sun Microsystems GmbH, Sonnenallee 1, D-85551 Kirchheim-Heimstetten Amtsgericht M?nchen: HRB 161028 Gesch?ftsf?hrer: Thomas Schr?der, Wolfgang Engels, Wolf Frenkel Vorsitzender des Aufsichtsrates: Martin H?ring
