Hi Andre, Andre Molyneux wrote, On 07/12/2009 16:15: > Liam Merwick wrote: >> >> Did you unbind and then bind the guest domain after you had done that ? > > Liam, > > I didn't realize that was necessary from the admin guide. So now I did: > > stop-domain > unbind-domain > bind-domain > start-domain > > And retried booting the domain from CD-ROM. Same symptoms as before. > > > Anything in /var/adm/messages in the control domain ? > > I see: > > [ID 877446 kern.info] vd_setup_vd(): /dev/dsk/c2tod0s2 is currently > inaccessible (error 2) >
Unless it's a copy and paste glitch, I think there's a typo in the config. c2tod0s2 should be c2t0d0s2 - Liam > messages a couple of times. To be clear, here, based on the admin guide > and Stefan's message I'm working under the assumption that rmvolmgr > needs to be disabled. I'd inserted the CD, used 'rmmount -l' to get the > CD drive path, issued 'svcadm disable rmvolmgr', then exported the CD > and assigned it to the guest domain. > > Do you see any problem with the steps I took or the order I took them > in? FYI, if you have a moment, you can log into the machine and take > a look. > > Thanks, > > Andre
