Attempted to create a secondary IO domain from the configuration example in the
blog (which must not have been tested because it has several commands flat out
wrong).
Anyway I was able to get the secondary configured and attempted to jumpstart a
OS onto the secondary by booting off the net. The boot vnet1 -s continues to
generate a message:
WARNING: /virtual-devices at 100/channel-devices at 200/network at 0: Timeout
connecting to virtual switch... retrying
And when I try to stop the domain with a ldm stop secondary It panics the
Hypervisor into a power down of the system.
Here is the bindings list!
ldm list-bindings
NAME STATE FLAGS CONS VCPU MEMORY UTIL UPTIME
primary active -n-cv- SP 4 2G 0.3% 3m
MAC
00:14:4f:22:30:20
HOSTID
0x84223020
CONTROL
failure-policy=ignore
DEPENDENCY
master=
VCPU
VID PID UTIL STRAND
0 0 0.3% 100%
1 1 0.2% 100%
2 2 0.3% 100%
3 3 0.7% 100%
MAU
ID CPUSET
0 (0, 1, 2, 3)
MEMORY
RA PA SIZE
0x8000000 0x8000000 2G
VARIABLES
auto-boot?=false
keyboard-layout=US-English
security-#badlogins=0
IO
DEVICE PSEUDONYM OPTIONS
pci at 780 bus_a
VCC
NAME PORT-RANGE
primary-vcc 10500-10550
VSW
NAME MAC NET-DEV DEVICE DEFAULT-VLAN-ID
PVID VID MTU MODE
v522-vsw0 00:14:4f:fa:77:69 e1000g0 switch at 0 1
1 1500
VDS
NAME VOLUME OPTIONS MPGROUP DEVICE
primary-vds0
VCONS
NAME SERVICE PORT
SP
------------------------------------------------------------------------------
NAME STATE FLAGS CONS VCPU MEMORY UTIL UPTIME
secondary inactive ------ 4 1968M
CONTROL
failure-policy=ignore
DEPENDENCY
master=
VSW
NAME MAC NET-DEV DEVICE DEFAULT-VLAN-ID
PVID VID MTU MODE
v599s-vsw0 00:14:4f:fa:90:a1 e1000g3 1 1
1500
VDS
NAME VOLUME OPTIONS MPGROUP DEVICE
secondary-vds0
NETWORK
NAME SERVICE DEVICE MAC
MODE PVID VID MTU
vnet1 v599s-vsw0 00:14:4f:f9:96:be
1
--
This message posted from opensolaris.org
