Mike
What system is this - looks from your naiming that it is a T5220 - this does not have busses you can split and therefore cannot have a secondary I/O domain. T On 18/01/2010 15:22, Mike DeMarco wrote: > Attempted to create a secondary IO domain from the configuration example in > the blog (which must not have been tested because it has several commands > flat out wrong). > Anyway I was able to get the secondary configured and attempted to jumpstart > a OS onto the secondary by booting off the net. The boot vnet1 -s continues > to generate a message: > > WARNING: /virtual-devices at 100/channel-devices at 200/network at 0: Timeout > connecting to virtual switch... retrying > > And when I try to stop the domain with a ldm stop secondary It panics the > Hypervisor into a power down of the system. > > Here is the bindings list! > > ldm list-bindings > NAME STATE FLAGS CONS VCPU MEMORY UTIL UPTIME > primary active -n-cv- SP 4 2G 0.3% 3m > > MAC > 00:14:4f:22:30:20 > > HOSTID > 0x84223020 > > CONTROL > failure-policy=ignore > > DEPENDENCY > master= > > VCPU > VID PID UTIL STRAND > 0 0 0.3% 100% > 1 1 0.2% 100% > 2 2 0.3% 100% > 3 3 0.7% 100% > > MAU > ID CPUSET > 0 (0, 1, 2, 3) > > MEMORY > RA PA SIZE > 0x8000000 0x8000000 2G > > VARIABLES > auto-boot?=false > keyboard-layout=US-English > security-#badlogins=0 > > IO > DEVICE PSEUDONYM OPTIONS > pci at 780 bus_a > > VCC > NAME PORT-RANGE > primary-vcc 10500-10550 > > VSW > NAME MAC NET-DEV DEVICE DEFAULT-VLAN-ID > PVID VID MTU MODE > v522-vsw0 00:14:4f:fa:77:69 e1000g0 switch at 0 1 > 1 1500 > > VDS > NAME VOLUME OPTIONS MPGROUP DEVICE > primary-vds0 > > VCONS > NAME SERVICE PORT > SP > > ------------------------------------------------------------------------------ > NAME STATE FLAGS CONS VCPU MEMORY UTIL UPTIME > secondary inactive ------ 4 1968M > > CONTROL > failure-policy=ignore > > DEPENDENCY > master= > > VSW > NAME MAC NET-DEV DEVICE DEFAULT-VLAN-ID > PVID VID MTU MODE > v599s-vsw0 00:14:4f:fa:90:a1 e1000g3 1 > 1 1500 > > VDS > NAME VOLUME OPTIONS MPGROUP DEVICE > secondary-vds0 > > NETWORK > NAME SERVICE DEVICE MAC > MODE PVID VID MTU > vnet1 v599s-vsw0 > 00:14:4f:f9:96:be 1
