> Actually I was also interested in only needing 2 ethernet cards as
> the scripts that I have seen seem to need 3.
If all you want is the Proxy-arp DMZ, just ignore the internal network
interface. Of course, if you only have 2 NIC's installed, you'll have to
change a few things (DMZ is setup for eth2 by default, which you don't
have).
Off the top of my head:
Swap instances of eth1 & eth2 in network.conf (ie internal network=eth2, DMZ
network=eth1)
Remove eth2 from the IF_AUTO list, so the scripts don't try to automatically
configure it
Everything *should* work...
Of course, you'll have some firewall rules masquerading your (non-existant)
internal network on eth2 to the internet, but the rules don't hurt anything
(except burning a few CPU cycles, which you should have pleanty of, even
with a 486).
Holler if you run into trouble with the above changes, or still have
problems once you've altered the DMZ for eth1.
Charles Steinkuehler
http://lrp.steinkuehler.net
http://c0wz.steinkuehler.net (lrp.c0wz.com mirror)
_______________________________________________
Leaf-user mailing list
[EMAIL PROTECTED]
http://lists.sourceforge.net/lists/listinfo/leaf-user
