I dont know a whole lot about LEAF and would like some advice, please. I would like to use LEAF as a way to join a network that has a cable modem for internet access and a network that needs extra security(later). The cable modem network used DHCP and so does the extra secure side. I need both NICs to use DHCP. Since I am in early testing stages, I would like to totally turn off the firewall portion. I have a pentium 100 with 32MB ram and SMC 1211 and KNE110. Downloaded and created a disk useing the Eigerstein distro from the LEAF site. I have gotten the two NICs to get recognised, useing IP ADDR SHOW, they both show up, but only one (eth1) will even try to get a DHCP address. I tried adding eth0 to the line EXTERN_IF line in network.conf, but it only causes tons of firewall errors on boot up. Can someone please help me get DHCP working on both NICs and totally turn off firewalling?? I will be happy to send any info asked for. Thanks a ton, David _______________________________________________ Leaf-user mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/leaf-user