I am sorry ray and others for the vagueness of my request. And I do appreciate your willingness to share your knowledge and expertise: here is the problem: I want to build a lrp disk for my laptop. I am using cable dsl what I have done: I downloaded the dachsteinv1.0.2-1680 based on kernel 2.2.19 I decided to get an extra linksys 10/100 PC card, model:pcmpc100 . so I am planning on using 2 linksys card for internal and external link.
while following the instruction in the readme file I descovered that I needed to add some modules if I wanted this to succeed. while reading mailing list I found out that linksys driver are compatible with 'tulip'. and since tulip was on the floppy disk i was one step closer to success. >From someone more knowledgeable than me I was told the following and I quote: "the pcmcia support comes in multiple modules: pcmcia-core, the module for your card-bridge, and the modules for each card you might insert." So I decided to look for those 3 modules too. i have not find them, yet. but I went ahead and tried it to load the floppy disk anyway: 1)I removed the # sign for the tulip module 2)I backed up what I have done and rebooted my system. what error i got: -->tulip: init_module:tulip: device or resource busy -->No subnet declaration for eth1(0.0.0) Please write a subnet declaration dhcp.conf So I could not complete the operation. If you find my mistakes here and things/steps I need to take to complete this task let me know. Again sorry for not being specific. -M _________________________________________________________________ Get your FREE download of MSN Explorer at http://explorer.msn.com/intl.asp. _______________________________________________ Leaf-user mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/leaf-user
