Welcome to the 2 External Interfaces world.. Lots of us has try this, i think Jack Coates has the most experience here with that.. But so far, i haven't heard of any one, with any SUCCESS story..
Seems like u already figure out the problem, getting the FIREWALL to work with 2 external interfaces.. I got some grey hair trying that for weeks, till i gived up.... cheers On Tue, 12 Feb 2002 13:15:11 -0500, Ryan P. Matijcio wrote: >I managed to get two interfaces going on Dachstein on Friday.��Using >the ethX_ROUTES= command instead of the ethX_DEFAULT_GW command.��I >added _metric_2 �to the end of my route and it created a default >route with a metric of 2.��I did a network reload and tested >everything to ensure it worked properly which it did.� > >� > >So far so good.� > >� > >Next, I brought up the pppoe interface by doing a /etc/init.d/pppoe >start.��It came up as expected.��However, it did not set the default >gateway as it normally does.��So I did so manually using the ip net >command and set it to have a metric of 1. �I was thinking of >scripting something in the ip-up script to add the gateway >automatically with the right metric.� > >� > >I also did some testing from inside the firewall to see if I could >pass traffic through it.��As expected, I could not.��I think this is >probably because I need to modify the firewall to support the extra >external interface.��So my million dollar question is, how can I >make Dachstein work with two external interfaces?��Ive been digging >thought the ipfilter.conf file and so far havent figured out how to >make this work.��Id really like to hear some suggestions on how one >might accomplish this type of configuration. > >� > >Thanks in advance. > >� > >Ryan > >� > >� > >� > � � ------------------------------------------------------------- Reginald R. Richardson [EMAIL PROTECTED] on 2/12/2002 _______________________________________________ Leaf-user mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/leaf-user
