Ok, its been awhile since last I had a real chance to work on this, and now
finally I'm getting into it...
I got all of the packages on the diskette (thanks again for so much help
from Lynn and Charles), and I got the serial device working (I feel like
such a dolt, I never checked the cable, thanks Charles) but know, after I
think I've written a very generic .conf file for ipsec, its bombing, and I'm
not able to connect to the other site. Attached is a copy of my ipsec.conf.
but I'm unable to get any results...
# system wide setup
config setup
interfaces=%defaultroute
klipsdebug=none
plutodebug=none
plutoload=%search
plutostart=%search
# uniqueids=yes # not yet, otherwise it'll only allow one
connection
conn %default
keyingtries=0
authby=rsasig
# left is joey's hose
# right is the shop
conn home-office
left=66.25.44.147
leftnexthope=66.25.44.1
leftsubnet=192.168.3.0/24
leftrsasigkey= < removed for space>
right=66.25.18.71
rightnexthope=66.25.18.1
rightsubnet=192.168.1.0/24
rightrsasigkey= <removed for space>
I still have uniqueids commented out because I read that to be that it would
only allow one connection at a time, ie only one user at a time to a
specific connection, want to be able to give the whole office access to the
other network. Can someone point out the obvious errors, and possibly give
me some assistance in getting this up...
Joey
_______________________________________________
Leaf-user mailing list
[EMAIL PROTECTED]
https://lists.sourceforge.net/lists/listinfo/leaf-user
