All,
I have successfully configured two LRP boxes, one on my home network which
uses DHCP and one at
my office using a fixed IP address. Pretty much "cookbook'ed" the office
setup from the great
documentation provided by Richard Lohman (thanks!). My office ISP is
WinStar. They installed a
Cisco 1720 series router as my access point. I have configured Eiger2Beta
to my office network
as follows. Works seamlessly except for FTP.
WWW \
| |
------------------- |
| 63.143.203.14 | |
|Cisco 1720 Router| |--Provided by my ISP
| 10.0.1.1 | |
------------------- |
| |
SWITCH |
| /
-------------------------
| 10.0.1.2 (eth0) |
| LRP |
| 192.168.100.241 (eth1)|
-------------------------
|
SWITCH ------------------>-Workstations 1-9
|
-------------------
| 192.168.100.254 |
| Server1 |
-------------------
I have tried to configure the LRP box directly to WWW using the fixed
address provided to me. I
was told it wouldn't work by my ISP (and it doesn't) - not sure
why?? Assumed FTP won't work
because of NAT done by the Cisco router. Any suggestions?
I would like to add a DMZ and (possibly later VPN) off the LRP
box. Winstar said they will reconfigure the Cisco router if I ask them
(not sure what to ask them though). Not sure where to start. Any
suggestions on setup options?
Thanks,
Ralph
Sorry if my terminology/explanation is poor - my occupation has nothing to
do with computers and I learn by reading only.
_______________________________________________
Leaf-user mailing list
[EMAIL PROTECTED]
https://lists.sourceforge.net/lists/listinfo/leaf-user
