Aanhalen The Tiger <[EMAIL PROTECTED]>: If I am not mistaken, the 8139 module depends on the mii.o module to be loaded in advance.
But You might want to try to find out which card is non functional. One way to accomplish this is to find out which ip address you already have. (for eth0) Try pinging that ip and check the back of your box for the led that is blinking on ping rhythm :-). Then check your box to see which card that is. That will probably give us some more info to troubleshoot your problem then we have now. Btw which cards are in there at this point (since you mention 3 different cards) Kim Oppalfens Azlan Training Leaf-project member > I am trying to create a bering floppy setup for my firewall and I am > having > trouble I think with the nics being recognized. I am using a smz ez100 > nic > and I tried using the tulip driver module and I also tried the 8139 > module > because it works in my smoothwall, I also had installed a intel pro100+ > and > took out a intel etherexpress16 because I wanted full duplex, I did not > find > a module for the intel pro100, intel supplies uncompiled code for one > called > e100.c but I am not set up to compile. I could not figure out which nic > was > not being recognized but I did get a message line saying "eth1 does not > exist" I could not figure out which nic was eth0 and 1 and what > address > they had, I tried ifup and ifdown but I am not very familiar with most > linux > commands. I tried a few different modules but could not get it > working. > smoothwall also did not recognise the intel pro100+ but smoothwall is > using > ipchains and I wanted the capabilies found in bering (iptables etc.). > > does anyone have any ideas for me to figure out what nics are working > and > what are not? > > thanks, > Tiger > > > > ------------------------------------------------------- > This sf.net email is sponsored by:ThinkGeek > Welcome to geek heaven. > http://thinkgeek.com/sf > ------------------------------------------------------------------------ > leaf-user mailing list: [EMAIL PROTECTED] > https://lists.sourceforge.net/lists/listinfo/leaf-user > SR FAQ: http://leaf-project.org/pub/doc/docmanager/docid_1891.html > > ------------------------------------------------- This mail sent through Tiscali Webmail (http://webmail.tiscali.be) ------------------------------------------------------- This sf.net email is sponsored by:ThinkGeek Welcome to geek heaven. http://thinkgeek.com/sf ------------------------------------------------------------------------ leaf-user mailing list: [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/leaf-user SR FAQ: http://leaf-project.org/pub/doc/docmanager/docid_1891.html
