Aanhalen The Tiger <[EMAIL PROTECTED]>: did you try loading mii.o before the 8139 module? what is the output of the ip add command??
Kim > Thanks Kim: > > I am currently running smoothwall with a Intel etherexpress16 and smz > ez100 > and the loaded modules are eexpress and rtl8139, I took out the > Intel > pro100 (pci, which I would like to use) and put back in the Intel > etherexress16 (isa) because I did not want to go without a firewall > for > too long. I did not get a chance to ping yet with the current setup, > but at > the time I had the other setup (with the Intel pro100), I tried ping and > did > not get a response from either nic. Strangely the smz nic works with > the > rtl8139 in smoothwall but the smc website supplies a tulip (tulip.H > whatever > that means). > > Are there any other Linux commands I can run besides ping? > > Does the leaf project have modules for supplying compiling tools? > > Tiger > > > To: The Tiger <[EMAIL PROTECTED]> > > Subject: Re: [leaf-user] eth1 not found > > Date: Tue, 02 Jul 2002 08:14:24 +0200 (CEST) > > From: [EMAIL PROTECTED] > > Cc: [EMAIL PROTECTED] > > > > Aanhalen The Tiger <[EMAIL PROTECTED]>: > > If I am not mistaken, the 8139 module depends on the mii.o module to > be > loaded > > in advance. > > > > But You might want to try to find out which card is non functional. > > One way to accomplish this is to find out which ip address you > already > have. > > (for eth0) > > > > Try pinging that ip and check the back of your box for the led that > is > blinking > > on ping rhythm :-). > > > > Then check your box to see which card that is. > > That will probably give us some more info to troubleshoot your > problem > then we > > have now. > > > > Btw which cards are in there at this point (since you mention 3 > different > cards) > > > > Kim Oppalfens > > Azlan Training > > Leaf-project member > > > > > > > > > I am trying to create a bering floppy setup for my firewall and I > am > > > having > > > trouble I think with the nics being recognized. I am using a smz > ez100 > > > nic > > > and I tried using the tulip driver module and I also tried the 8139 > > > module > > > because it works in my smoothwall, I also had installed a intel > pro100+ > > > and > > > took out a intel etherexpress16 because I wanted full duplex, I did > not > > > find > > > a module for the intel pro100, intel supplies uncompiled code for > one > > > called > > > e100.c but I am not set up to compile. I could not figure out which > nic > > > was > > > not being recognized but I did get a message line saying "eth1 does > not > > > exist" I could not figure out which nic was eth0 and 1 and what > > > address > > > they had, I tried ifup and ifdown but I am not very familiar with > most > > > linux > > > commands. I tried a few different modules but could not get it > > > working. > > > smoothwall also did not recognise the intel pro100+ but smoothwall > is > > > using > > > ipchains and I wanted the capabilies found in bering (iptables > etc.). > > > > > > does anyone have any ideas for me to figure out what nics are > working > > > and > > > what are not? > > > > > > thanks, > > > Tiger > > > > > > > > > > > > > ------------------------------------------------------- > This sf.net email is sponsored by:ThinkGeek > No, I will not fix your computer. > http://thinkgeek.com/sf > ------------------------------------------------------------------------ > leaf-user mailing list: [EMAIL PROTECTED] > https://lists.sourceforge.net/lists/listinfo/leaf-user > SR FAQ: http://leaf-project.org/pub/doc/docmanager/docid_1891.html > > ------------------------------------------------- This mail sent through Tiscali Webmail (http://webmail.tiscali.be) ------------------------------------------------------- This sf.net email is sponsored by:ThinkGeek No, I will not fix your computer. http://thinkgeek.com/sf ------------------------------------------------------------------------ leaf-user mailing list: [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/leaf-user SR FAQ: http://leaf-project.org/pub/doc/docmanager/docid_1891.html
