On Tue, 2002-07-09 at 09:56, Troy Aden wrote: > I am running dhrelay. So it is getting hit with quite a few lease requests > being forwarded to our DHCP servers. About once a week when our leases get > renewed I get the following error. "Eth1 : Too much work during interrupt. > Csr5=0xF0630040." (This is the interface where our DHCP server resides) I > am assuming that this is because the nic is being flooded on port 67 between > its' ports and it is dropping packets as a result. So far I have updated to > the most recent tulip driver (v0.93), and I have applied the following fix: > "echo "500 1000 2000" > /proc/sys/vm/freepages" > (Check link for details) > http://www.tux.org/hypermail/linux-tulip/2001-Nov/0053.html > > This seemed to work but the problem has returned. Does anyone have any > suggestions? Is there a way that I can increase the maximum work during the > interrupt? Is there a driver for this card that works properly? Can someone > point me to a link that will be helpful? > > > Thanks in advance. > > Troy >
FWIW, the current version of the tulip driver at scyld (ftp://ftp.scyld.com/pub/network/tulip.c) is 0.95. ------------------------------------------------------- This sf.net email is sponsored by:ThinkGeek Stuff, things, and much much more. http://thinkgeek.com/sf ------------------------------------------------------------------------ leaf-user mailing list: [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/leaf-user SR FAQ: http://leaf-project.org/pub/doc/docmanager/docid_1891.html
