Is there one that is compiled for Dachstein? I do not have access to
a Linux box.
Thanks.
-----Original Message-----
From: Richard Doyle [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, July 09, 2002 12:37 PM
To: Troy Aden
Cc: Leaf-User (E-mail)
Subject: Re: [leaf-user] DFE-570-TX Too much work during interrupt
On Tue, 2002-07-09 at 09:56, Troy Aden wrote:
> I am running dhrelay. So it is getting hit with quite a few lease requests
> being forwarded to our DHCP servers. About once a week when our leases get
> renewed I get the following error. "Eth1 : Too much work during interrupt.
> Csr5=0xF0630040." (This is the interface where our DHCP server resides) I
> am assuming that this is because the nic is being flooded on port 67
between
> its' ports and it is dropping packets as a result. So far I have updated
to
> the most recent tulip driver (v0.93), and I have applied the following
fix:
> "echo "500 1000 2000" > /proc/sys/vm/freepages"
> (Check link for details)
> http://www.tux.org/hypermail/linux-tulip/2001-Nov/0053.html
>
> This seemed to work but the problem has returned. Does anyone have any
> suggestions? Is there a way that I can increase the maximum work during
the
> interrupt? Is there a driver for this card that works properly? Can
someone
> point me to a link that will be helpful?
>
>
> Thanks in advance.
>
> Troy
>
FWIW, the current version of the tulip driver at scyld
(ftp://ftp.scyld.com/pub/network/tulip.c) is 0.95.
-------------------------------------------------------
This sf.net email is sponsored by:ThinkGeek
Stuff, things, and much much more.
http://thinkgeek.com/sf
------------------------------------------------------------------------
leaf-user mailing list: [EMAIL PROTECTED]
https://lists.sourceforge.net/lists/listinfo/leaf-user
SR FAQ: http://leaf-project.org/pub/doc/docmanager/docid_1891.html
