Why don't u just do this at HardWare level, with the SETUP program provided by the Manufacturer..
That's what I did with all my cards, and don't have to worry my head with the driver options.. Do hope this advise helps -----Original Message----- From: Rob Fegley [mailto:[EMAIL PROTECTED]] Sent: Monday, July 15, 2002 21:31 To: [EMAIL PROTECTED] Subject: [leaf-user] Bering: Realtek 8139 NICs and Full-Duplex I have the Belkin F5D5000 NICs as both eth0 and eth1 and am having trouble understanding the necessary configuration to force 100Mbps and Full-Duplex and to disable auto-negotiation. I have included the following excerpt from my /etc/modules file: # Those realtek based NICs need mii module mii #8139cp 8139too #full_duplex=0x1,0x1 media=0x8,0x8 #epic100 #pcnet32 #viarhine #winbond-840 I obviously have the arguments to the "8139too" module commented out because it causes a "kernel: eth0: Too much work at interrupt, IntrStatus=0x0040." message for both interfaces about every 90 seconds. Any assistance would be greatly appreciated. Thanks! Rob Fegley ------------------------------------------------------- This sf.net email is sponsored by:ThinkGeek Welcome to geek heaven. http://thinkgeek.com/sf ------------------------------------------------------------------------ leaf-user mailing list: [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/leaf-user SR FAQ: http://leaf-project.org/pub/doc/docmanager/docid_1891.html ------------------------------------------------------- This sf.net email is sponsored by:ThinkGeek Welcome to geek heaven. http://thinkgeek.com/sf ------------------------------------------------------------------------ leaf-user mailing list: [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/leaf-user SR FAQ: http://leaf-project.org/pub/doc/docmanager/docid_1891.html