Lee Kimber wrote about "Re: [leaf-user] WISP partition questions":
> >Edit "/etc/modules" and uncomment ne there: > > > >#ne io=0x300,0x350 > > > >Change the IO port to the one you use. You may also need to > >specify IRQ, like "ne io=0x200 irq=5" > Oh right. As with other LEAFs. What I meant is, is there a route to this > via the menu system? No. It is not possible to reliably detect ISA cards so drivers for them are not loaded automatically. Just go to the command line, edit /etc/modules, then save the configuration. -- Best Regards, Vladimir Systems Engineer (RHCE) ------------------------------------------------------- This SF.net email is sponsored by: ApacheCon, November 18-21 in Las Vegas (supported by COMDEX), the only Apache event to be fully supported by the ASF. http://www.apachecon.com ------------------------------------------------------------------------ leaf-user mailing list: [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/leaf-user SR FAQ: http://leaf-project.org/pub/doc/docmanager/docid_1891.html