Hey all,
I'm not sure if what I'm doing is going to work the way I envision it.
I have an Off The Shelf AP, a WISP box, several wireless connection and
several wired connections
Here's my proposed network
Internet -- AP ~~~~~ Wireless ~~~~~ WISP -- Wired
|
Wired
I have the WISP box joining the SSID as a Managed Node, and it can ping
the AP. However, any wired clients behind the WISP can't get an IP
address from the AP.
I'm not sure if I've configured the Bridging the right way or if my whole
idea is hosed.
Basically, I want the two wired segments and wireless segment to be one
whole segment
Interfaces wlan0 and eth0 are loading properly.
Here's my if.config file.
DEFAULT_GW="192.168.2.1"
IFACES="wlan0 eth0"
eth0_IPADDR="192.168.0.4/24"
wlan0_IPADDR="192.168.2.3/24"
ENABLE_PARP_BRIDGING="yes"
Thanks for any help.
--Pat
-------------------------------------------------------
This sf.net email is sponsored by:
With Great Power, Comes Great Responsibility
Learn to use your power at OSDN's High Performance Computing Channel
http://hpc.devchannel.org/
------------------------------------------------------------------------
leaf-user mailing list: [EMAIL PROTECTED]
https://lists.sourceforge.net/lists/listinfo/leaf-user
SR FAQ: http://leaf-project.org/pub/doc/docmanager/docid_1891.html
