I don't recall it needing any specific command line arguments. You might check your messages and or daemon log files on your dachstein box. See if there is anything obvious coming up. Also, as a proof, make sure that your workstation can connect with dachstein in the way. It should, but that atleast verifies that your workstation setup is correct
joey -----Original Message----- From: Colin Helliwell [mailto:[EMAIL PROTECTED]] Sent: Saturday, December 21, 2002 11:47 AM To: [EMAIL PROTECTED]; [EMAIL PROTECTED] Subject: Re: [leaf-user] Need help with Cisco VPN client through (Dachstein) LRP ip_masq_sec is loaded - if that's the one you mean. I assume it doesn't need any configuration specifying? ----- Original Message ----- From: "Joey Officer" <[EMAIL PROTECTED]> To: "Colin Helliwell" <[EMAIL PROTECTED]>; "Colin Helliwell" <[EMAIL PROTECTED]>; <[EMAIL PROTECTED]> Sent: Saturday, 21 December 2002 17:24 Subject: RE: [leaf-user] Need help with Cisco VPN client through (Dachstein) LRP > you should first verify that you have loaded and installed the IPSec module. > edit modules.conf (from the menu) and remove the hash mark "#" from the line > that has the ipsec module. this is for pass through vpn/ipsec > configurations. > > that should fix the problem > ------------------------------------------------------- This SF.NET email is sponsored by: Order your Holiday Geek Presents Now! Green Lasers, Hip Geek T-Shirts, Remote Control Tanks, Caffeinated Soap, MP3 Players, XBox Games, Flying Saucers, WebCams, Smart Putty. T H I N K G E E K . C O M http://www.thinkgeek.com/sf/ ------------------------------------------------------------------------ leaf-user mailing list: [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/leaf-user SR FAQ: http://leaf-project.org/pub/doc/docmanager/docid_1891.html
