Many thanks to all those who posted to me about my problems with my 3c509 NICs! I finally got the right module and it works great.... only about half the time. I'm guessing I need to specify my IO for both of them. (Both are 3c509). My BIOS doesn't support reserving an IRQ for ISA as someone suggested. It is an old Phoenix 486 BIOS. A couple people suggested specifying the IRQ. Does it make a difference if I use IO or IRQ to get the drivers to load right? When the NICs don't come up I get the message- insmod init_module: 3c509: operation not supported by device. The module I am using now is from the 2.4.18 site of Jacque, I made sure the versions were the same this time just in case there was a difference. While I could just reboot enough times to get both to come up I would think there must be a simpler solution. What is the syntax for specifying two NICs IRQ or IO. Presently my config file only lists the needed module with no reference to IO or IRQ. Many thanks in advance for your help.
------------------------------------------------------- This SF.NET email is sponsored by: Take your first step towards giving your online business a competitive advantage. Test-drive a Thawte SSL certificate - our easy online guide will show you how. Click here to get started: http://ads.sourceforge.net/cgi-bin/redirect.pl?thaw0027en ------------------------------------------------------------------------ leaf-user mailing list: [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/leaf-user SR FAQ: http://leaf-project.org/pub/doc/docmanager/docid_1891.html
