Support Requests item #594097, was opened at 2002-08-12 10:57
You can respond by visiting:
https://sourceforge.net/tracker/?func=detail&atid=213751&aid=594097&group_id=13751
Category: Release/Branch: Dachstein
Group: None
>Status: Closed
Priority: 5
Submitted By: Dion Bird (dionb98)
Assigned to: Mike Noyes (mhnoyes)
Summary: Dachstein will not start on 486/100.....
Initial Comment:
Dachstein will not start on my 486 DX4/100 with 32MB
of RAM. Here is a summary of the boot process before
it locks up.
IP Filters: [IP Forwarding: DISABLED] flushed
SIOCGIFFLAGS: Operation not supported by device
Bind socket to interface: Operation not supported by
device exiting
Starting Network: [IP Always Defrag: ENABLED]
IP filters: firewall [IP Forwarding: ENABLED]
Loopback interface: lo
Starting interface: Cannot find device "eth1"
SIOCGIFFLAGS: Operation not supported by device
eth1
Hostname: firewall
Static NS: 2 hosts
At this point the cursor just sits and flashes.
On my other systems the disk will boot completely,
with the summary I have provided, same as what's
written above. (Including the operation not supported by
device stuff) Any insight on why it won't continue past
this point on the 486?
As I said before it is a 486 DX4/100 with 32MB RAM. I
have stripped it down to just the PCI video card and the
PCI NIC card. I've tried booting it with no NIC card, and
1 card and 2 cards. If I boot the system under Windows
98, it will detect the network cards so they appear to be
functioning.
I would appreciate any suggestions you have.
Dion
----------------------------------------------------------------------
>Comment By: Lynn Avants (guitarlynn)
Date: 2003-01-28 16:56
Message:
Logged In: YES
user_id=176069
I am closing this request due to lack of a response.
If there are still any issues, please open a new request.
----------------------------------------------------------------------
Comment By: magic freeman (kiwispaniol)
Date: 2002-11-16 04:21
Message:
Logged In: YES
user_id=650015
hi Dion
sorry for asking about other stuff
does this Dachstein supports dial on demand (56k modem)
today is the first time i read about it, i cant find more info
about it.
cheers mate
freeman
----------------------------------------------------------------------
Comment By: Nobody/Anonymous (nobody)
Date: 2002-08-14 09:30
Message:
Logged In: NO
Have you configured the NIC's with DOS?,
What is the make and model of your NIC's
Are you loading the right drivers?
example: NE2000-pci = pciscan + 8390 + ne2k-pci modules to
load.
Is your BIOS set to PNP os?
Peter
----------------------------------------------------------------------
Comment By: Lynn Avants (guitarlynn)
Date: 2002-08-13 22:41
Message:
Logged In: YES
user_id=176069
Some old BIOS's do not detect the larger floppy format that the LEAF
distro's use. A BIOS update may or may not allow for the larger format
and I do not know of a definate fix that works for this problem. You may
need to reduce your LEAF disk to fit on a 1.44M formatted disk or use
a different machine.
Unfortunately this is the best advice I can give on this one.
I hope it helps,
~Lynn
----------------------------------------------------------------------
You can respond by visiting:
https://sourceforge.net/tracker/?func=detail&atid=213751&aid=594097&group_id=13751
-------------------------------------------------------
This SF.NET email is sponsored by:
SourceForge Enterprise Edition + IBM + LinuxWorld = Something 2 See!
http://www.vasoftware.com
------------------------------------------------------------------------
leaf-user mailing list: [EMAIL PROTECTED]
https://lists.sourceforge.net/lists/listinfo/leaf-user
SR FAQ: http://leaf-project.org/pub/doc/docmanager/docid_1891.html
