Ok. Diagram below will require bridging. Did you turn it on? Also, try the latest test release from http://www.hazard.maks.net/wisp-dist/downloads/
Dave Shpritz wrote about "Re: [leaf-user] WISP on soekris help": > Ok, here is a whole bunch of info: > > Here's how I'd like the network to look: > Two Soekris Net4511s > > Gateway---wired net----eth0|4511(10.0.0.69/24)|netcs0 > (10.0.0.1/24) | > wireless net > | > wds0/wi0|4511| > (10.0.0.70) > | > wireless net > | > |Clent PC| > > Since my first email I have switched to the latest stable release (2397), and now > I'm not even getting access point up. I have a feeling its something stupid that > I'm doing wrong. > > Here is ip addr show: > 1: lo: <LOOPBACK,UP> mtu 16436 qdisc noqueue > link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 > inet 127.0.0.1/8 scope host lo > 2: dummy0: <BROADCAST,NOARP> mtu 1500 qdisc noop > link/ether 00:00:00:00:00:00 brd ff:ff:ff:ff:ff:ff > 3: eth0: <BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast qlen 100 > link/ether 00:00:24:c0:60:d4 brd ff:ff:ff:ff:ff:ff > inet 10.0.0.69/24 scope global eth0 > 4: eth1: <BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast qlen 100 > link/ether 00:00:24:c0:60:d5 brd ff:ff:ff:ff:ff:ff > 5: [EMAIL PROTECTED]: <NOARP> mtu 1476 qdisc noop > link/gre 0.0.0.0 brd 0.0.0.0 > 6: netcs0: <BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast qlen 100 > link/ether 00:05:5d:d6:b6:81 brd ff:ff:ff:ff:ff:ff > inet 10.0.0.69/24 scope global netcs0 > > as for /etc/shorewall, I have no such directory. > > Thanks again, > Dave > > > ---------- Original Message ---------------------------------- > From: Vladimir Ivaschenko <[EMAIL PROTECTED]> > Date: Tue, 11 Mar 2003 14:30:45 +0200 > > > > >Strange, I didn't see your message on wisp list. > > > >To understand why you cannot serf, please give us more information - > >IP addresses, network diagram etc. > > > >I'd guess that something wrong with NAT or routing (default gateway etc). > > > >Dave Shpritz wrote: > >> I tried askig this on the WISP list, but got no response (maybe not many people > >> on the list?). Anyway, thanks for any help in advance. > >> > >> Dave > >> > >> > >> Hey folks, > >> I'm having a large amount of trouble getting my soekris board as an access > >> points. Well, it acts as an access point (I'm using a Prism 2.5 D-Link Air 650 > >> PCMCIA card), that is I can connect to the ap as a client, I get a good signal, > >> but I can't surf. ARG! Any help would be great, thanks in advance. > >> > >> Dave > >> > >> > >> > >> > >> > >> ------------------------------------------------------- > >> This sf.net email is sponsored by:ThinkGeek > >> Welcome to geek heaven. > >> http://thinkgeek.com/sf > >> ------------------------------------------------------------------------ > >> leaf-user mailing list: [EMAIL PROTECTED] > >> https://lists.sourceforge.net/lists/listinfo/leaf-user > >> SR FAQ: http://leaf-project.org/pub/doc/docmanager/docid_1891.html > >> > > > > > >-- > >Best Regards, > >Vladimir Ivaschenko > >Thunderworx - Systems Engineer (RHCE) > > > > -- Best Regards, Vladimir Ivaschenko Thunderworx - Systems Engineer (RHCE) ------------------------------------------------------- This SF.net email is sponsored by:Crypto Challenge is now open! Get cracking and register here for some mind boggling fun and the chance of winning an Apple iPod: http://ads.sourceforge.net/cgi-bin/redirect.pl?thaw0031en ------------------------------------------------------------------------ leaf-user mailing list: [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/leaf-user SR FAQ: http://leaf-project.org/pub/doc/docmanager/docid_1891.html
