Le Mardi 11 Mars 2003 07:52, Simon Blake a écrit : > ok. Using Bering to make a remote bridge. A very, very, mini howto. > > You need a bering system, with bridging already working, and with the > tun.o kernel module loaded. Make sure /dev/net/tun exists, if it > doesn't, add > > mkdir /dev/net > mknod /dev/net/tun c 10 200 > > to the end of /var/lib/lrpkg/root.dev.mk , and backup initrd.lrp. > > (Jacques/Eric, would be nice to get that into Bering by default) Yes. Or could be added in the vtund.lrp package in the init.d/vtund script
> get the vtund executable (from http://vtun.sourceforge.net/ ) onto your > box. Unfortunately, I don't have a package that'll do this (well, I do, > but it's compiled against glibc-2.2.5, so probably isn't much help to > most people). It's available for Bering here: http://leaf.sourceforge.net/devel/jnilo/packages/vtund.lrp Jacques > make a bridge device in /etc/network/interfaces, add the real interfaces > you want to bridge, and the tap0 interface: > > iface br0 inet static > address 192.168.1.0 > masklen 32 > bridge_ports eth0 tap0 > > note that you *don't* want an "auto br0" line in there - this thing > won't work unless it's started after vtund has created tap0, so you > don't want the system bringing up the bridge at boot time. > > create vtund.conf, you'll need something like: ------------------------------------------------------- This sf.net email is sponsored by:ThinkGeek Welcome to geek heaven. http://thinkgeek.com/sf ------------------------------------------------------------------------ leaf-user mailing list: [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/leaf-user SR FAQ: http://leaf-project.org/pub/doc/docmanager/docid_1891.html