Paul, On Fri, 21 Mar 2003 08:52:59 EST Paul Haigh wrote:
> Hi All. > > Getting error "insmod: unresolved symbol __out_of_state_line_bug" with > 3c509.o module? That's a new one on me. Please tell us what distribution you are using and also the URL where you downloaded the module. You may be using a module from the wrong kernel tree. > This occurs during boot or when performed by hand. > > PC is a DEC PX LPx+ 450d2. > > I have set the card to base / IRQ to 0x300 / irq=3 repectively > and have confirmed this with 3com utility, 3c5x9cfg.exe. This is probably not your immediate problem, but typically IRQ 3 is used by one of the serial ports. You might want to use a different IRQ to avoid conflicts. IRQ 10 is often used for NICs. > I have turn off PNP with PDSABL.exe. Never heard of that one, but if it turns off PnP it probably won't hurt and shouldn't be the cause of your module problem. > However, I still get the error. > > I have even downloaded the 3c509.o module twice to in case of a bad > download. > > Could the module be bad? > What could be going on? > What should I do next? See above. > > If this can't be fixed does anyone recommend an ISA card I can purchase? > Please advise. Any help is greatly appreiated. I have several 3c509s. Interested. ;-) Seriously though, I think you will be very happy with the 3c509 after you get the module problem worked out. My bets are currently on a module version mis-match. --Brad ------------------------------------------------------- This sf.net email is sponsored by:ThinkGeek Welcome to geek heaven. http://thinkgeek.com/sf ------------------------------------------------------------------------ leaf-user mailing list: [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/leaf-user SR FAQ: http://leaf-project.org/pub/doc/docmanager/docid_1891.html
