>> My router is AT form factor and I have no keyboard for it. Not a >> problem as I just boot the Bering disk on another system(of course I >> can't ssh in until I get Bering working). Is it possible to mount and >> edit the floppy directly on my Debian box or is booting it the only >> way to edit it? Thanks again. >a) Pick a workstation... most any workstation... reboot with floppy... >edit configuration files... backup.... remove floppy... reboot to normal >working environment. This is probably the easiest way to edit initrd.lrp >if you don't have a keyboard/monitor for your SBC... it is a compressed >minix image, unlike the rest of the .lrp files.
That's what I've been doing and it works just fine of course. I'll just go that route as I didn't see anything legible on the floppy when I mounted it. -thanks Jeff -- ______________________________________________ http://www.linuxmail.org/ Now with e-mail forwarding for only US$5.95/yr Powered by Outblaze ------------------------------------------------------- This SF.net email is sponsored by: eBay Get office equipment for less on eBay! http://adfarm.mediaplex.com/ad/ck/711-11697-6916-5 ------------------------------------------------------------------------ leaf-user mailing list: [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/leaf-user SR FAQ: http://leaf-project.org/pub/doc/docmanager/docid_1891.html