Yes, I would look at antenna/dipole/pigtail/wireless card etc.
Samuel Abreu de Paula wrote:
I made more tests here, and i find one thing strange! When the wisp-dist is sending a file in direction of ap1000 (To a station behind the ap1000), the signal in AP Manager goes to 40%, and i get some packet loss, when i stop the transmission, the signal back to 60%!
In the other station if i try the same thing, the signal still the same, and the file is transmitted ok.
What can be happened in the signal??? Is most likely be a hardware problem??? or in antenna?
Thanks
Samuel Abreu
On Tue, 03 Jun 2003 11:19:54 +0300 Vladimir Ivaschenko <[EMAIL PROTECTED]> wrote:
What are the signal levels from both sides?
------------------------------------------------------- This SF.net email is sponsored by: eBay Get office equipment for less on eBay! http://adfarm.mediaplex.com/ad/ck/711-11697-6916-5 ------------------------------------------------------------------------ leaf-user mailing list: [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/leaf-user SR FAQ: http://leaf-project.org/pub/doc/docmanager/docid_1891.html
-- Best Regards, Vladimir Ivaschenko Thunderworx - Senior Systems Engineer (RHCE)
------------------------------------------------------- This SF.net email is sponsored by: Etnus, makers of TotalView, The best thread debugger on the planet. Designed with thread debugging features you've never dreamed of, try TotalView 6 free at www.etnus.com. ------------------------------------------------------------------------ leaf-user mailing list: [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/leaf-user SR FAQ: http://leaf-project.org/pub/doc/docmanager/docid_1891.html
