> Problem I have is that the T40 has no legacy FDD but only an > USB attached > external FDD. > > Copied usbcore, usb-uhci and usb-storage modules and rebuilt > the initrd.lrp. > > When booting I get (transcribed manually from what I can see > on the screen > 8-<): > .... > hub.c: USB hub found > hub.c: 2 ports detected > usb_uhci.c: USB uhci at I/O 0x1820, IRQ 11 > usb_uhci.c: Detected 2 ports > usb.c: new USB bus registered as number 2 > ... same lines as above > usb.c: new USB hub registered, assigned bus number 3 > ... same as above > Using /boot/lib/modules/usb-stor.o > Insmod unresolved symbol scsi_unregister_module > Insmod unresolved symbol scsi_register > Insmod unresolved symbol scsi_register_module > Linuxrc Could not mount the boot device. Can't install packages > Kernel panic: attempted to kill init > > From what I understand (no guru here 8-<) could it be that > the kernel does > not support the scsi "emulation" that is usually > used to mount a USB storage device ??
You will need the scsi modules also. Luis Correia Bering uClibc Team PGP Fingerprint: BC44 D7DA 5A17 F92A CA21 9ABE DFF0 3540 2322 21F6 Key Server: http://pgp.mit.edu ------------------------------------------------------- This sf.net email is sponsored by:ThinkGeek Welcome to geek heaven. http://thinkgeek.com/sf ------------------------------------------------------------------------ leaf-user mailing list: [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/leaf-user SR FAQ: http://leaf-project.org/pub/doc/docmanager/docid_1891.html
