Eric,
Thank you ! That solved the booting problem. I also saw that sh-httpd was not found. It turns out that when I make the disk image or when Nero burns it, sh-httpd becomes sh_httpd. Simple enough to fix. Now the only remaining issue is getting the time zone info to work. I tried an entry in /etc/TZ and a file from Charles site for /etc/local time but ntpdate keeps setting the time to UTC
which I guess is as it should but I don't get the proper offset from date command. I have a cron job that stops internet access for certain machines at a certain time of day. Cron keeps executing them early. I live in Ohio so it seems I am off by 5 hours.
Kory
Eric Spakman wrote:
Hi Kory,
It looks like you used a "wrong" editor to edit leaf.cfg, one with cr/lf . You need a editor which understands Linux fileformat.
Eric
Any idea why I am getting these errors when my bootable uClibc CD boots?
: not foundpkg/mnt/leaf.cfg: 7:
: not foundpkg/mnt/leaf.cfg: 10:
: not foundpkg/mnt/leaf.cfg: 13:
: not foundpkg/mnt/leaf.cfg: 20:
TMPFS filesystem...30M
' for mount option 'size'
pivot_root: pivot_root: Device or resource busy
' for mount option 'size'
VFS: Can't find a Minix or Minix V2 filesystem on device 03:00.
FAT: bogus logical sector size 0
VFS: Can't find a valid FAT filesystem on dev 03:00.
LINUXRC: Installing - root: /dev/cdrom config: /dev/cdrom etc:
/dev/cdrom lo
cal: /dev/cdrom modules: /dev/cdrom iptables: /dev/cdrom dhcpcd:
/dev/cdrom
shorwall: /dev/cdrom ulogd: /dev/cdrom dnsmasq: /dev/cdrom sh-httpd:
sh-httpd
(nf!) - Finished.v/cdrom libm: /dev/cdrom ntpdate: /dev/cdrom weblet
LINUXRC: Loaded Packages
INIT: version 2.85 booting
umount: /initrd: Invalid argument
freeramdisk: failed ioctl on /dev/ram0: Device or resource busy
INIT: Entering runlevel: 2
I created the cd using the same bin creation setup used for my Bering
1.2 which works fine.
My isolinux.cfg:
serial 0 115200
display syslinux.dpy
timeout 0
append console=ttyS0,115200
default linux initrd=initrd.lrp init=/linuxrc rw root=/dev/ram0
boot=/dev/cdrom:iso9660 LEAFCFG=/dev/cdrom:iso9660
My LEAF.cfg:
LRP="root config etc local modules iptables dhcpcd shorwall ulogd
dnsmasq sh-httpd samba libm ntpdate weblet"
PKGPATH="/dev/cdrom:iso9660"
syst_size=30M
log_size=2M
I am using the initrd with ide support
The modules load looks like this:
Using /boot/lib/modules/cdrom.o
Using /boot/lib/modules/ide-core.o
Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
ide: Assuming 33MHz system bus speed for PIO modes; override with
idebus=xx
Using /boot/lib/modules/ide-disk.o
Using /boot/lib/modules/ide-cd.o
Using /boot/lib/modules/ide-detect.o
hda: ATAPI CDROM, ATAPI CD/DVD-ROM drive
hdc: WDC AC26400R, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
Using /boot/lib/modules/isofs.o
Using /boot/lib/modules/jbd.o
Journalled Block Device driver loaded
Using /boot/lib/modules/ext3.o
hda: attached ide-cdrom driver.
hda: ATAPI 24X CD-ROM drive, 128kB Cache
Thanks,
Kory
-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now.
http://productguide.itmanagersjournal.com/
------------------------------------------------------------------------
leaf-user mailing list: leaf-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/leaf-user
SR FAQ: http://leaf-project.org/pub/doc/docmanager/docid_1891.html
-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now. http://productguide.itmanagersjournal.com/
------------------------------------------------------------------------
leaf-user mailing list: leaf-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/leaf-user
SR FAQ: http://leaf-project.org/pub/doc/docmanager/docid_1891.html
