I have the following kernel and modules installed:
Kernel:
Linux version 2.2.19-3-LEAF ([EMAIL PROTECTED]) (gcc version 2.7.2.3) #1 Sat
Dec 1
12:15:05 CST 2001
Installed Modules:
ip_masq_vdolive 1180 0
ip_masq_user 3708 0 (unused)
ip_masq_raudio 2980 0
ip_masq_quake 1220 0
ip_masq_portfw 2416 0 (unused)
ip_masq_mfw 3196 0
ip_masq_irc 1924 0
ip_masq_ipsec 7328 0
ip_masq_ftp 3576 0
ip_masq_cuseeme 964 0 (unused)
ip_masq_autofw 2476 0 (unused)
ne 6292 2
8390 6236 0 [ne]
bsd_comp 3708 0 (unused)
ppp_deflate 40672 0 (unused)
ppp 20828 2 [bsd_comp ppp_deflate]
slhc 4436 0 [ppp]
I had help from Charles on getting the VPN connection working with these
commands in /etc/network.conf:
# For Home Depot VPN to work per Charles
EXTERN_UDP_PORTS="0/0_500"
# -or-
# Indexed list: "SrcAddr/Mask port [ DestAddr[/DestMask] ]"
#EXTERN_UDP_PORT0="0/0 domain"
#EXTERN_UDP_PORT1="5.6.7.8 500 1.1.1.12"
# For Home Depot VPN to work
EXTERN_PORTS="50_0/0 51_0/0"
This is commented out, so not sure if it should be updated to stop the error
logs below:
# Generic Services open to outside world
# Space seperated list: protocol_srcip/mask_dstport
# uncomment for Home Depot VPN
#EXTERN_PORTS="50_5.6.7.8 51_207.11.4.7"
Should the 50_5.6.7.8 be changed to my DHCP laptop address or my static IP??
I am getting the following errors in my log and slow connection speeds to
the work VPN:
Packet log: input REJECT eth1 PROTO=17 192.168.1.7:1053 10.200.25.204:161
L=106 S=0x00 I=29089 F=0x0000 T=128 (#72)
I think I need to open port 1053, however not sure how to do that, if
someone could verify and explain I would be greatful.
My rule #72 is:
Chain input (policy DENY: 0 packets, 0 bytes):
num pkts bytes target prot opt tosa tosx ifname mark
outsize source destination ports
72 176 18525 REJECT udp ----l- 0xFF 0x00 *
0.0.0.0/0 0.0.0.0/0 * -> 161:162
I am at a loss as to how to get it working correctly with no errors on the
log. I believe that is why my connection speeds are so slow. Can anyone
share some light for me, and remember I am a newbe to linux. I get the
digest version, so please respond to my e-mail address as well. Thanks
-------------------------------------------------------
This SF.Net email is sponsored by: IntelliVIEW -- Interactive Reporting
Tool for open source databases. Create drag-&-drop reports. Save time
by over 75%! Publish reports on the web. Export to DOC, XLS, RTF, etc.
Download a FREE copy at http://www.intelliview.com/go/osdn_nl
------------------------------------------------------------------------
leaf-user mailing list: [email protected]
https://lists.sourceforge.net/lists/listinfo/leaf-user
SR FAQ: http://leaf-project.org/pub/doc/docmanager/docid_1891.html
