Halo,
I get message:
Error: either "local" is duplicate, or "/24" is a garbage.
when booting (before shorewall)
Thaks a lot for any idea!
hugo# ip a
1: lo: <LOOPBACK,UP> mtu 16436 qdisc noqueue
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
2: dummy0: <BROADCAST,NOARP> mtu 1500 qdisc noop
link/ether 00:00:00:00:00:00 brd ff:ff:ff:ff:ff:ff
3: eth0: <BROADCAST,MULTICAST,NOTRAILERS,UP> mtu 1500 qdisc pfifo_fast qlen
1000
link/ether 00:0e:2e:2b:f0:3d brd ff:ff:ff:ff:ff:ff
inet 86.49.71.93/24 brd 86.49.71.255 scope global eth0
4: eth1: <BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast qlen 1000
link/ether 00:0e:2e:2c:9b:af brd ff:ff:ff:ff:ff:ff
inet 10.1.1.1/24 brd 10.1.1.255 scope global eth1
5: wifi0: <BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast qlen 199
link/ieee802.11 00:14:78:74:cb:fc brd ff:ff:ff:ff:ff:ff
6: ath0: <BROADCAST,MULTICAST,UP> mtu 1500 qdisc noqueue
link/ether 00:14:78:74:cb:fc brd ff:ff:ff:ff:ff:ff
hugo# ifup ath0
Error: either "local" is duplicate, or "/24" is a garbage.
hugo# ip a a 10.1.2.1/24 dev ath0
hugo# ip a
1: lo: <LOOPBACK,UP> mtu 16436 qdisc noqueue
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
2: dummy0: <BROADCAST,NOARP> mtu 1500 qdisc noop
link/ether 00:00:00:00:00:00 brd ff:ff:ff:ff:ff:ff
3: eth0: <BROADCAST,MULTICAST,NOTRAILERS,UP> mtu 1500 qdisc pfifo_fast qlen
1000
link/ether 00:0e:2e:2b:f0:3d brd ff:ff:ff:ff:ff:ff
inet 86.49.71.93/24 brd 86.49.71.255 scope global eth0
4: eth1: <BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast qlen 1000
link/ether 00:0e:2e:2c:9b:af brd ff:ff:ff:ff:ff:ff
inet 10.1.1.1/24 brd 10.1.1.255 scope global eth1
5: wifi0: <BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast qlen 199
link/ieee802.11 00:14:78:74:cb:fc brd ff:ff:ff:ff:ff:ff
6: ath0: <BROADCAST,MULTICAST,UP> mtu 1500 qdisc noqueue
link/ether 00:14:78:74:cb:fc brd ff:ff:ff:ff:ff:ff
inet 10.1.2.1/24 scope global ath0
hugo# ip r
86.49.71.0/24 dev eth0 proto kernel scope link src 86.49.71.93
10.1.1.0/24 dev eth1 proto kernel scope link src 10.1.1.1
10.1.2.0/24 dev ath0 proto kernel scope link src 10.1.2.1
default via 86.49.71.1 dev eth0
hugo#
interfaces:
auto eth0
iface eth0 inet dhcp
auto eth1
iface eth1 inet static
address 10.1.1.1
netmask 255.255.255.0
broadcast 10.1.1.255
auto ath0
iface ath0 inet static
address 10.1.2.1
netmask 255.255.255.0
broadcast 10.1.2.255
madwifi-base wifi0
wireless-channel 1
wireless-essid fickK
wireless-mode master
modules:
crc32
mii
viarhine
wlan
wlan_scan_sta
wlan_scan_ap
wlan_acl
wlan_ccmp
wlan_tkip
wlan_wep
wlan_xauth
ath_hal
ath_rate_sample
ath_pci
crc32 - mii - viarhine - via-rhine.c:v1.10-LK1.1.19 July-12-2003 Written
by Do
nald Becker
http://www.scyld.com/network/via-rhine.html
PCI: Found IRQ 10 for device 00:0b.0
eth0: VIA VT6105 Rhine-III at 0xe000, 00:0e:2e:2b:f0:3d, IRQ 10.
eth0: MII PHY found at address 1, status 0x7869 advertising 05e1 Link 45e1.
PCI: Found IRQ 11 for device 00:0c.0
eth1: VIA VT6105 Rhine-III at 0xd800, 00:0e:2e:2c:9b:af, IRQ 11.
eth1: MII PHY found at address 1, status 0x7869 advertising 05e1 Link 41e1.
wlan - wlan: 0.8.4.2 (0.9.2)
wlan_scan_sta - wlan_scan_ap - wlan_acl - wlan: mac acl policy registered
wlan_ccmp - wlan_tkip - wlan_wep - wlan_xauth - ath_hal - Warning: loading
ath_h
al will taint the kernel: non-GPL license - Proprietary
See http://www.tux.org/lkml/#export-tainted for information about tainted
modu
lath_hal: 0.9.17.2 (es
AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
ath_rate_sample - ath_rate_sample: 1.2 (0.9.2)
ath_pci - ath_pci: 0.9.4.5 (0.9.2)
PCI: Found IRQ 12 for device 00:0a.0
wifi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
wifi0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps
24Mbps 36
Mbps 48Mbps 54Mbps
wifi0: H/W encryption support: WEP AES AES_CCM TKIP
wifi0: mac 7.8 phy 4.5 radio 5.6
wifi0: Use hw queue 1 for WME_AC_BE traffic
wifi0: Use hw queue 0 for WME_AC_BK traffic
wifi0: Use hw queue 2 for WME_AC_VI traffic
wifi0: Use hw queue 3 for WME_AC_VO traffic
wifi0: Use hw queue 8 for CAB traffic
wifi0: Use hw queue 9 for beacons
wifi0: Atheros 5212: mem=0xdf800000, irq=12
--
View this message in context:
http://www.nabble.com/madwifi-on-Bering-uClibc-3.0b2-tf2401964.html#a6697182
Sent from the leaf-user mailing list archive at Nabble.com.
-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys -- and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
------------------------------------------------------------------------
leaf-user mailing list: [email protected]
https://lists.sourceforge.net/lists/listinfo/leaf-user
Support Request -- http://leaf-project.org/
