-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Adam Niedzwiedzki wrote: <snip> > Invaild argument happens when I try and mount the /dev/sbd1 with out > specifying the filesystem type. > > nas# fdisk /dev/sdb > > The number of cylinders for this disk is set to 121583. > There is nothing wrong with that, but this is larger than 1024, > and could in certain setups cause problems with: > 1) software that runs at boot time (e.g., old versions of LILO) > 2) booting and partitioning software from other OSs > (e.g., DOS FDISK, OS/2 FDISK) > > Command (m for help): p > > Disk /dev/sdb: 1000.0 GB, 1000056291328 bytes > 255 heads, 63 sectors/track, 121583 cylinders > Units = cylinders of 16065 * 512 = 8225280 bytes > > Device Boot Start End Blocks Id System > /dev/sdb1 1 121583 976615416 83 Linux > > Seems to work fine...
Hint: Try "fdisk -l /dev/sdb" as a short-cut. > I've been told that non of the "nix" os's ship with a module for this card, > so I can't do a live boot, as I need to compile the module for the card. I'm not sure what you're talking about here, but assuming the RAID card comes with BIOS support, you should be able to boot directly from the RAID using an appropriate initrd containing the RAID driver module using the bootloader of your choice (ie: lilo, grub, syslinux, etc). > I'm not sure where to go from here, I don't really want to run up a windows > box just to act as a NAS :( Um...what exactly is the problem? Your RAID array is showing up as /dev/sdb. Since you didn't indicate you created any other RAID devices on the card, the additional devices (which the driver seems to allocate by default) are not actually there. The array you *HAVE* defined seems to show up as expected in fdisk, and it sounds like it mounts if you pass the required filesystem type flag. So...in exactly what way are things broken? If you're just worried about the errors reported for the non-existent arrays, you may be able to pass a parameter when loading the module to make these go away...a quick glance through the code found "int osm_max_targets = 32;" in config.c, which looks like it's causing the driver to behave like it's talking to 32 "drives". Reducing this might clean up the 'garbage' you're seeing. - -- Charles Steinkuehler [EMAIL PROTECTED] -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.7 (MingW32) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org iD8DBQFHVx7tLywbqEHdNFwRAvX/AKCclb8S8ThXlUuhBgK1VsHFXoRBrgCgsnK1 Ny9H5izxwH1enkWzKZH8T3U= =dD8O -----END PGP SIGNATURE----- ------------------------------------------------------------------------- SF.Net email is sponsored by: The Future of Linux Business White Paper from Novell. From the desktop to the data center, Linux is going mainstream. Let it simplify your IT future. http://altfarm.mediaplex.com/ad/ck/8857-50307-18918-4 ------------------------------------------------------------------------ leaf-user mailing list: leaf-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/leaf-user Support Request -- http://leaf-project.org/