Since obviously nobody has the driver of that nic, I tried to compile it by
myself with the buildtool environment.
Now I have the e1000e.o but the 'insmod e1000e' complains about unresolved
symbols called pm_qos_remove_management. So I suppose something went wrong
while compiling and now the driver is for 2.6 kernel and not 2.4.34-6 as
needed.
In the logfile i found something strage: I think it should not use my FC10
kernel-dir !!!???
---- SNIPP
/src/bering-uclibc/buildtool/source/e1000e/e1000e-0.5.11.2/src modules
make[2]: Entering directory `/usr/src/kernels/2.6.27.19-170.2.35.fc10.i686'
CC [M]
/home/remote/bering/src/bering-uclibc/buildtool/source/e1000e/e1000e-0.5.11.2/src/netdev.o
CC [M]
/home/remote/bering/src/bering-uclibc/buildtool/source/e1000e/e1000e-0.5.11.2/src/ethtool.o
CC [M]
/home/remote/bering/src/bering-uclibc/buildtool/source/e1000e/e1000e-0.5.11.2/src/param.o
CC [M]
/home/remote/bering/src/bering-uclibc/buildtool/source/e1000e/e1000e-0.5.11.2/src/e1000_82571.o
CC [M]
/home/remote/bering/src/bering-uclibc/buildtool/source/e1000e/e1000e-0.5.11.2/src/e1000_ich8lan.o
CC [M]
/home/remote/bering/src/bering-uclibc/buildtool/source/e1000e/e1000e-0.5.11.2/src/e1000_80003es2lan.o
CC [M]
/home/remote/bering/src/bering-uclibc/buildtool/source/e1000e/e1000e-0.5.11.2/src/e1000_mac.o
CC [M]
/home/remote/bering/src/bering-uclibc/buildtool/source/e1000e/e1000e-0.5.11.2/src/e1000_nvm.o
CC [M]
/home/remote/bering/src/bering-uclibc/buildtool/source/e1000e/e1000e-0.5.11.2/src/e1000_phy.o
CC [M]
/home/remote/bering/src/bering-uclibc/buildtool/source/e1000e/e1000e-0.5.11.2/src/e1000_manage.o
CC [M]
/home/remote/bering/src/bering-uclibc/buildtool/source/e1000e/e1000e-0.5.11.2/src/kcompat.o
LD [M]
/home/remote/bering/src/bering-uclibc/buildtool/source/e1000e/e1000e-0.5.11.2/src/e1000e.o
Building modules, stage 2.
MODPOST 1 modules
CC
/home/remote/bering/src/bering-uclibc/buildtool/source/e1000e/e1000e-0.5.11.2/src/e1000e.mod.o
LD [M]
/home/remote/bering/src/bering-uclibc/buildtool/source/e1000e/e1000e-0.5.11.2/src/e1000e.ko
make[2]: Leaving directory `/usr/src/kernels/2.6.27.19-170.2.35.fc10.i686'
-------- SNIPP
I suppose that I have made an error in the buildtool.mk but can not find it.
I comment out the ./configure line since I do not have one there.
-------- SNIPP
#/home/remote/bering/src/bering-uclibc/buildtool/source/e1000e/buildtool.mk
include $(MASTERMAKEFILE)
MODUTILSDIR_DIR:=e1000e-0.5.11.2/src
$(MODUTILSDIR_DIR)/.source:
zcat $(MODUTILS_SOURCE) | tar -xvf -
touch $(MODUTILSDIR_DIR)/.source
source: $(MODUTILSDIR_DIR)/.source
$(MODUTILSDIR_DIR)/.build: $(MODUTILSDIR_DIR)/.source
mkdir -p $(BT_BUILD_DIR)/modutils
(cd $(MODUTILSDIR_DIR); \
rm -rf config.cache; \
CFLAGS="$(BT_COPT_FLAGS)" \
CC=$(TARGET_CC) \
LD=$(TARGET_LD) ); #\
# ./configure --disable-root-check );
make CFLAGS="$(BT_COPT_FLAGS)" CC=$(TARGET_CC) HOSTCC=$(TARGET_CC)
HOSTCFLAGS="$(BT_COPT_FLAGS)" LD=$(TARGET_LD) -C $(MODUTILSDIR_DIR)
make CFLAGS="$(BT_COPT_FLAGS)" CC=$(TARGET_CC) HOSTCC=$(TARGET_CC)
HOSTCFLAGS="$(BT_COPT_FLAGS)" LD=$(TARGET_LD)
DESTDIR=$(BT_BUILD_DIR)/modutils -C $(MODUTILSDIR_DIR) install
make CFLAGS="$(BT_COPT_FLAGS)" CC=$(TARGET_CC) HOSTCC=$(TARGET_CC)
HOSTCFLAGS="$(BT_COPT_FLAGS)" LD=$(TARGET_LD) DESTDIR=$(BT_STAGING_DIR) -C
$(MODUTILSDIR_DIR) install
touch $(MODUTILSDIR_DIR)/.build
build: $(MODUTILSDIR_DIR)/.build
Can anyone give me a hint ?
Thank you in advance.
Juergen
------------------------------------------------------------------------------
Apps built with the Adobe(R) Flex(R) framework and Flex Builder(TM) are
powering Web 2.0 with engaging, cross-platform capabilities. Quickly and
easily build your RIAs with Flex Builder, the Eclipse(TM)based development
software that enables intelligent coding and step-through debugging.
Download the free 60 day trial. http://p.sf.net/sfu/www-adobe-com
------------------------------------------------------------------------
leaf-user mailing list: leaf-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/leaf-user
Support Request -- http://leaf-project.org/
