I didn't try the x86_64 first because there's no serial version of it. I've created a stick from Bering-uClibc_5.2.3_x86_64_syslinux_vga.tar.gz and replaced the /syslinux/syslinux.cfg file with the one from Bering-uClibc_5.2.3_i686_syslinux_serial115200.tar.gz. And I removed the quiet kernel option.
> SERIAL 0 115200 > DISPLAY syslinux.dpy > TIMEOUT 0 > APPEND reboot=bios usb_wait=3 console=ttyS0,115200n8 VERBOSE=1 intel_idle.max_cstate=0 processor.max_cstate=1 > DEFAULT /syslinux/linux initrd=/initrd.lrp,/initmod.lrp rw root=/dev/ram0 LEAFCFG=/dev/sda1:vfat That hangs too after the "Loading /initmod.lrp...Loading /initmod.lrp...okok" line. SeaBIOS (version rel-1.8.0-190-gc029eab-20151109_141843-wim-ws) XHCI init on dev 00:10.0: regs @ 0xfeb22000, 4 ports, 32 slots, 32 byte contexts XHCI extcap 0x1 @ feb22500 XHCI protocol USB 3.00, 2 ports (offset 1), def 0 XHCI protocol USB 2.00, 2 ports (offset 3), def 10 XHCI extcap 0xa @ feb22540 Found 2 serial ports ATA controller 1 at 4010/4020/0 (irq 0 dev 88) EHCI init on dev 00:13.0 (regs=0xfeb25420) ATA controller 2 at 4018/4024/0 (irq 0 dev 88) Searching bootorder for: /pci@i0cf8/*@14,7 Searching bootorder for: /rom@img/memtest Searching bootorder for: /rom@img/setup XHCI port #4: 0x00200e03, powered, enabled, pls 0, speed 3 [High] Searching bootorder for: /pci@i0cf8/usb@10/storage@4/*@0/*@0,0 Searching bootorder for: /pci@i0cf8/usb@10/usb-*@4 USB MSC vendor='' product='USB DISK 2.0' rev='PMAP' type=0 removable=1 Initialized USB HUB (0 ports used) USB MSC blksize=512 sectors=30291264 All threads complete. Scan for option roms PCengines Press F10 key now for boot menu: Searching bootorder for: HALT drive 0x000f2dc0: PCHS=0/0/0 translation=lba LCHS=1024/255/63 s=30291264 Space available for UMB: c1000-ef000, f0000-f2dc0 Returned 258048 bytes of ZoneHigh e820 map has 7 items: 0: 0000000000000000 - 000000000009f800 = 1 RAM 1: 000000000009f800 - 00000000000a0000 = 2 RESERVED 2: 00000000000f0000 - 0000000000100000 = 2 RESERVED 3: 0000000000100000 - 00000000dffad000 = 1 RAM 4: 00000000dffad000 - 00000000e0000000 = 2 RESERVED 5: 00000000f8000000 - 00000000fc000000 = 2 RESERVED 6: 0000000100000000 - 000000011f000000 = 1 RAM enter handle_19: NULL Booting from Hard Disk... Booting from 0000:7c00 SYSLINUX 6.03 EDD 2014-10-06 Copyright (C) 1994-2014 H. Peter Anvin et al SYSLINUX 6.03 2014-10-06 Copyright (C) 1994-2014 H. Peter Anvin et al - -#- - ############################### Bering-uClibc Firewall # # ################# (5.2.3 - 2015-12-30) # # ################# (uClibc 0.9.33.2 Bering-uClibc team) # # ##### Bering ### This image brought to you by: # # ################# # ##### ################# The LEAF project: # ################# http://leaf.sourceforge.net ############################### ################# ##### # The Shorewall project: ################ # # # http://www.shorewall.net ################ ##### # ############### # # ############## # ## ############ ## --#############-- - Loading /syslinux/linux... Loading /syslinux/linux... okok Loading /initrd.lrp...Loading /initrd.lrp...okok Loading /initmod.lrp...Loading /initmod.lrp...okok ▒ On Sat, Jan 16, 2016 at 4:37 PM, Andrew <ni...@seti.kr.ua> wrote: > 16.01.2016 16:48, Sven Kirmess пишет: > > I don't succeed booting Bering on my APU2B4. < > http://pcengines.ch/apu2b4.htm > > First I tried the Bering-uClibc_5.2.3_geode_syslinux_serial115200.tar.gz > > image and got the following error message: > > > > This kernel requires the following features not present on the CPU: > > 3dnow > > > > Is that expected? Isn't the geode image the correct one for this board? > Yes, this board has non-Geode CPU. It has fresh 64bit Jaguar-cores AMD > CPU. So you can use generic x86_64 or i686 - which has better throughput > on this board (IMHO on IPv4 there'll be no significant difference or > even i686 may be faster due to less RAM footprint; on IPv6 x86_64 will > be better). > > > > > With the Bering-uClibc_5.2.3_i686_syslinux_serial115200.tar.gz image it > > hangs after "Loading /initmod.lrp...Loading /initmod.lrp...okok" > Can you look for kernel parameters in syslinux? It seems like kernel > doesn't use serial console (or hangs before console initialization). > > > > ------------------------------------------------------------------------------ > Site24x7 APM Insight: Get Deep Visibility into Application Performance > APM + Mobile APM + RUM: Monitor 3 App instances at just $35/Month > Monitor end-to-end web transactions and take corrective actions now > Troubleshoot faster and improve end-user experience. Signup Now! > http://pubads.g.doubleclick.net/gampad/clk?id=267308311&iu=/4140 > ------------------------------------------------------------------------ > leaf-user mailing list: leaf-user@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/leaf-user > Support Request -- http://leaf-project.org/ > ------------------------------------------------------------------------------ Site24x7 APM Insight: Get Deep Visibility into Application Performance APM + Mobile APM + RUM: Monitor 3 App instances at just $35/Month Monitor end-to-end web transactions and take corrective actions now Troubleshoot faster and improve end-user experience. Signup Now! http://pubads.g.doubleclick.net/gampad/clk?id=267308311&iu=/4140 ------------------------------------------------------------------------ leaf-user mailing list: leaf-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/leaf-user Support Request -- http://leaf-project.org/
