> On 15 Aug 2016, at 11:38, Andrew <ni...@seti.kr.ua> wrote: > > On 13.08.2016 17:31, David M Brooke wrote: >> Thanks kp. >> >>> On 13 Aug 2016, at 13:57, kp kirchdoerfer <kap...@users.sourceforge.net> >>> wrote: >>> >>> Am Samstag, 13. August 2016, 11:56:26 schrieb David M Brooke: >>>> Thanks for the feedback. >>>> >>>> @Andrew - removing ‘quiet’ didn’t provide any further diagnostics. >>>> >>>> I upgraded to the latest APU2 BIOS / firmware to see if that helped. >>>> Since that supports iPXE boot I was able to pull in the BuC x86_64 kernel >>>> and initrd, initmod. That worked fine so there’s no compatibility issue, >>>> but it still doesn’t want to boot from the SD. >>>> >>>> @kp - which device are you using to boot from - an mSATA drive, USB or the >>>> SD slot? Maybe I need to invest in a small mSATA drive. >>> I boot from mSATA, also USB worked, at least for the installation. >> I have USB boot working now. There’s no output from the kernel while it is >> booting but if you wait >> you get a login prompt. > Wrong serial port specified in 'console=' parameter?…
I used the x86_64_syslinux_serial115200 image which appears to have it set correctly in syslinux/syslinux.cfg console=ttyS0,115200n8 I’m sure I got kernel output when booting with iPXE, using the same console= setting, so I’m puzzled (but it’s working OK so I’m happy enough for now). David ------------------------------------------------------------------------------ What NetFlow Analyzer can do for you? Monitors network bandwidth and traffic patterns at an interface-level. Reveals which users, apps, and protocols are consuming the most bandwidth. Provides multi-vendor support for NetFlow, J-Flow, sFlow and other flows. Make informed decisions using capacity planning reports. http://sdm.link/zohodev2dev ------------------------------------------------------------------------ leaf-user mailing list: leaf-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/leaf-user Support Request -- http://leaf-project.org/