On 12 September 2016 at 00:12, Stijn Tintel <st...@linux-ipv6.be> wrote:
> Signed-off-by: Stijn Tintel <st...@linux-ipv6.be>
> ---
> package/boot/uboot-envtools/files/ar71xx | 1 +
> target/linux/ar71xx/base-files/etc/board.d/01_leds | 5 +
> .../linux/ar71xx/base-files/etc/board.d/02_network | 5 +
> .../etc/hotplug.d/firmware/11-ath10k-caldata | 4 +
> .../base-files/etc/uci-defaults/09_fix-checksum | 9 +
> target/linux/ar71xx/base-files/lib/ar71xx.sh | 3 +
> .../ar71xx/base-files/lib/upgrade/platform.sh | 13 ++
> target/linux/ar71xx/config-4.4 | 1 +
> .../ar71xx/files/arch/mips/ath79/Kconfig.openwrt | 9 +
> target/linux/ar71xx/files/arch/mips/ath79/Makefile | 1 +
> .../files/arch/mips/ath79/mach-dap-2695-a1.c | 191
> +++++++++++++++++++++
> .../linux/ar71xx/files/arch/mips/ath79/machtypes.h | 1 +
> target/linux/ar71xx/image/generic.mk | 38 ++++
> 13 files changed, 281 insertions(+)
> create mode 100644
> target/linux/ar71xx/files/arch/mips/ath79/mach-dap-2695-a1.c
We have just got rid of the 09_fix-seama-header by excluding jffs2
marker from the calculation of checksum. The result image flashes
just fine because it looks like the device will flash the whole
uploaded file instead of just the size in the image header. If that
is also the case with fixwrgg then we can save a few flash block
erases.
yousong
_______________________________________________
Lede-dev mailing list
Lede-dev@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/lede-dev
