On 12-09-16 06:10, Yousong Zhou wrote: > On 12 September 2016 at 00:12, Stijn Tintel <st...@linux-ipv6.be> wrote: >> Signed-off-by: Stijn Tintel <st...@linux-ipv6.be> >> --- >> package/boot/uboot-envtools/files/ar71xx | 1 + >> target/linux/ar71xx/base-files/etc/board.d/01_leds | 5 + >> .../linux/ar71xx/base-files/etc/board.d/02_network | 5 + >> .../etc/hotplug.d/firmware/11-ath10k-caldata | 4 + >> .../base-files/etc/uci-defaults/09_fix-checksum | 9 + >> target/linux/ar71xx/base-files/lib/ar71xx.sh | 3 + >> .../ar71xx/base-files/lib/upgrade/platform.sh | 13 ++ >> target/linux/ar71xx/config-4.4 | 1 + >> .../ar71xx/files/arch/mips/ath79/Kconfig.openwrt | 9 + >> target/linux/ar71xx/files/arch/mips/ath79/Makefile | 1 + >> .../files/arch/mips/ath79/mach-dap-2695-a1.c | 191 >> +++++++++++++++++++++ >> .../linux/ar71xx/files/arch/mips/ath79/machtypes.h | 1 + >> target/linux/ar71xx/image/generic.mk | 38 ++++ >> 13 files changed, 281 insertions(+) >> create mode 100644 >> target/linux/ar71xx/files/arch/mips/ath79/mach-dap-2695-a1.c > We have just got rid of the 09_fix-seama-header by excluding jffs2 > marker from the calculation of checksum. The result image flashes > just fine because it looks like the device will flash the whole > uploaded file instead of just the size in the image header. If that > is also the case with fixwrgg then we can save a few flash block > erases. This works fine for sysupgrade images, and when flashing via the bootloader. Unfortunately such image doesn't flash via the web interface of the stock firmware.
Stijn _______________________________________________ Lede-dev mailing list Lede-dev@lists.infradead.org http://lists.infradead.org/mailman/listinfo/lede-dev
